Christmas Delivery Times

FloFit Flo-Fit FB15 Push-Fit Elbow White 15mm 5 Pack Product Code: 72219

€5.15
Flexible and fully demountable push-fit plumbing system ranging from 10-22mm. Suitable for all domestic/commercial hot and cold water installations. Enables the installer to undertake a faster, easier and more cost effective installation. Maintenance-free white finish. Good thermal resistance to freezing conditions.

Features

  • Construction
  • Demountable

Specifications

BS 7291.
Additional Information
Technical Specification
  • Brand : FloFit
  • Product Height : 53.68 mm
  • Product Length : 53.68 mm
  • Product Type : Elbow
  • Model Name : Flo-Fit
  • Total Product Weight : 0.03 kg
  • Model No : FB15
  • Connection Type : Push-Fit
  • Colour : White
  • Pack Size : 5
  • Product Diameter : 15 mm
  • Manufacturer Guarantee : 25 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 5
  • Mount Type : Demountable
  • CE Standard (Tested to EN...) : BS 7291.
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

Was €6.55

Special Price €5.15

Incl. 23% VAT

Save €1.40 (21%)


Add to Wishlist

More Items to Consider

Loading... Loading...
1
FloFit Flo-Fit FB15 Push-Fit Elbow White 15mm 5 Pack is rated 3.9 out of 5 by 73.
Rated 1 out of 5 by from Leaky I have been doing bits of plumbing for a while and I had 2 leaks on this project with both being a Flofit. Replaced with Speedfit and no problems. Couldn’t get a Flofit Tee in an awkward place and after wrestling for over an hour bought a Speedfit, to have it connected in under a minute. The quality and speed of this product is nowhere near as good as Hep2o or Speedfit. I will not buy any Flofit again. And yes the gaps were correct and it was installed correctly. Also with the Tee I ended up cutting it off with a Dremel. The other systems are so much better
Date published: 2018-11-22
Rated 4 out of 5 by from Value for money Great valve and quality product xxxxxxxxxxxxxxxxxxxxxxxxx
Date published: 2018-11-13
Rated 5 out of 5 by from push fit all good no probs went with all flo-fit products i.e inserts straights ,, no probs
Date published: 2018-10-20
Rated 4 out of 5 by from Excellent Product Very easy to use. The only thing is that you need a special tool to release the fitting but other than that great bit of kit
Date published: 2018-09-17
Rated 5 out of 5 by from Very reliable and easy to use I use these elbows in pluming rigs which need rapid construction and complete reliability even when assembled/disassembled many times. These elbows fit the bot perfectly:- very easy and quick to use (no special tools required), completely reliable (haven't had one fail yet), and very cost-effective.
Date published: 2018-05-20
Rated 2 out of 5 by from Warning Just a word of warning with these. Once fitted they are very very difficult to de-mount, you need to be the ultimate warrior to get them off without using a spanner or grippers. If you are working in a tight space I would avoid these ones. Price wise not bad but not for me. Replaced with jg speed fit.
Date published: 2018-05-02
Rated 1 out of 5 by from bad AS A PLUMBER USED MOST PLASTIC FITTINGS AND THESE ARE IN A LEAGUE OF THERE OWN-LOWER LEAGUE.YOU NEED TO BE RAMBO TO PUT TOGETHER AND RAMBO TO TAKE APART.FLOFIT OR FLOPLAST FITTINGARE CHEAP FOR REASON.EASY FIT AND DEMOUNTABLE IS RUBBISH.FLOPLAST TRAPS ARE NOT MUCH BETTER,PLASTIC SEALS THAT ARE SO HARD THEY NEED PTFE TO SEAL CORRECTLY-WHEN ARE PLUMBING MANUFACTURE GONNA REALISE THAT WE DONT WANT CHEAP JUST QUALITY!
Date published: 2018-04-19
Rated 5 out of 5 by from Great fittings I use flofit fittings where ever I can.. As good as other plastic push fit fittings. They also do a blue and red collar ring so you can identify a hot or cold pipe..
Date published: 2018-03-14
  • y_2018, m_12, d_12, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_73
  • loc_en_IE, sid_72219, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie