FloPlast Female Pipe Adaptor 20mm x ¾" Product Code: 32438

MDPE to ¾" BSP female thread.


  • Demountable & Reusable
  • Suitable for Domestic & Commercial Use
Additional Information
Technical Specification
  • Brand : FloPlast
  • Product Type : Female Pipe Adaptor
  • Total Product Weight : 0.05 kg
  • Pack Size : 1
  • Suitable System : Suitable for Domestic & Commercial Use
  • Product Diameter : 20 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • Mount Type : Demountable & Reusable
  • Thread Size : ¾ "
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€3.65 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
FloPlast Female Pipe Adaptor 20mm x ¾" is rated 2.4 out of 5 by 8.
Rated 3 out of 5 by from thread difficult to screw it took me many careful tries before I could screw a brass part without damaging the first three threads. It starts OK but a bit tight, then how hard one try to keep the two parts in line, it drift askew and one must unscrew it and try again.
Date published: 2017-09-12
Rated 4 out of 5 by from Good for an irrigation system I brougt this to connect 20mm HDPE pipe to a 3/4" tap for a sprinkler system. Does the job!
Date published: 2017-08-18
Rated 1 out of 5 by from Avoid this item just now As other recent reviewers (March 2017) have pointed out, the thread on this which is supposed to be 3/4" isn't. It will not thread to any 3/4" brass fittings. It will end up with chewed, mashed threads. You will have to return it. Plan a different connection to start with and save yourself multiple trips... Never had a problem with anything from Screwfix before, and I always recommend them. Just can't recommend this item.
Date published: 2017-03-19
Rated 1 out of 5 by from Terrible, avoid this product. I bought this to thread onto a 3/4" brass fitting. The first one, regardless of how careful you try to screw the item on will only go on cross threaded and leaks severely. Tried to rectify with PTFE tape. Didn't work and still leaks. Bought a brand new brass fitting and ANOTHER floplast pipe adaptor. Measured both threads to ensure suitability but, same again! So, 2 adaptors destroyed. 2 trips to screw fix. And no further forward.. awful product.
Date published: 2017-02-13
Rated 1 out of 5 by from Unable to thread I too was incredibly careful but was unable to thread a 3/4" 15mm adaptor. Would suggest a faulty batch ?
Date published: 2016-07-14
Rated 1 out of 5 by from MDPE adaptor female adaptor will NOT accept male brass 3/4 to 15mm pipe adaptor (82086) as it will not thread (and yes I was very careful) But male mdpe apadtor threads perfectly onto female brass 3/4 to 15mm pipe adaptor (81402) first time. (I used PTFE tape as well dont know if that helps)
Date published: 2016-06-12
Rated 4 out of 5 by from Spot on I needed to connect from plastic pipe to metal outside tap. This is exactly what I needed at a very good price. The icing on the cake was the service at the Hinckley Branch. The man who served me was both knowledgeable and helpful and took his time to make sure I had the right connector.
Date published: 2015-08-03
Rated 4 out of 5 by from Good value pipe adaptor Don't be fooled by the picture, which shows the male fitting. A perfectly acceptable standard pipe fitting at a lower price than competing brands.
Date published: 2012-06-28
  • y_2018, m_8, d_14, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_IE, sid_32438, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie