Flooring Clamp Product Code: 19107

For secure laying of laminate and parquet flooring.


  • Metal Plate Holds Securely Across First Plank
Additional Information
Technical Specification
  • Brand : Unbranded
  • Total Product Weight : 0.839 kg
  • Colour : Blue
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€10.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Flooring Clamp is rated 4.0 out of 5 by 35.
Rated 5 out of 5 by from Flooring clamp Could not have layed the floor without them, great bit of kit at a very good price.
Date published: 2017-01-24
Rated 4 out of 5 by from Very useful floor clamps Works extremely well. For the price, a great piece of equipment. The floor wold not have looked as good without these 2 clamps.
Date published: 2016-10-18
Rated 4 out of 5 by from Good product Used for laying a large engineered wood floor. This tool performs very well but does require a couple of tweaks before use. These adjustments take a couple of minutes and are well worth doing. The tool itself is essential when laying any click together or tongue and groove floor and does its job extremely well. Don't be coerced into buying the more expensive versions, they don't do the job any better. Tips: 1. Rub down the surface of the underside with a light sand paper, the paint finish is a little rough and this will prevent any scratches 2. remove the screw holding the ratchet to the plate and scrape out the paint underneath it then refit and tighten. This prevents the screw head damaging the floor surface. 3. Don't strike the ratchet plate with a hammer as it will mark the floor or damage the ratchet 4. Don't over tighten as the ratchet can buckle under excessive load. 5. Hold down the plate end with a tool box / large paint can / Wife or similar as it can lift the boards when tightening.
Date published: 2016-06-21
Rated 5 out of 5 by from Make floating wood floors easy bought these to help my son lay a floating solid wood tongue and groove floor. Don't know how we would have done the job (well) without them. These work really well and are a bargain at the price.
Date published: 2016-06-13
Rated 1 out of 5 by from Useless Tired this to close up gaps in flooring, wouldn't close anything, Much better using an off cut of flooring and a hammer.
Date published: 2016-05-07
Rated 5 out of 5 by from floor clamps great product easy to use and very reasonable price wise
Date published: 2015-10-09
Rated 4 out of 5 by from No more open joints! This handy tool takes all the stress and lots of the effort when laying laminate flooring. No need to use blocks of wood to tap joints together and potentially damage the joining edges. It takes a bit of getting used to but well worth the effort of learning. Thin enough to get close to the wall. I found that when you have taken up the strain and the board is nearly home - a sharp tap on the clamping plate with a hammer helps click the board to its final tight joint.
Date published: 2015-07-08
Rated 5 out of 5 by from brilliant tool this was great for making those joins as tight as I needed without having to have an extra pair of hand, easy to use and no damage to the boards. The strap is long and can get in the way but you need the length if you are tightening boards longways you just get used to putting it out of your road.....recommended.
Date published: 2015-05-19
  • y_2017, m_11, d_23, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_35
  • loc_en_IE, sid_19107, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie