Floor-Tite Screws 4.2 x 55mm 200 Pack Product Code: 49231

€10.95
Zinc and blue-passivated and case-hardened. For use with high density fibre boards. Tri-Lock threadform and shank incorporate the benefits of a single coarse thread with a twin thread start. Spiral point, part thread and under-head ribs for self-countersinking. Flush, neat fix will not work loose, prevents squeaky boards. No pilot hole necessary. Ideal for all flooring such as softwood, fibreboard and hardwood.

Features

  • Countersunk Prodrive Head
  • Removable
Additional Information
Technical Specification
  • Brand : Floor-Tite
  • Product Length : 55 mm
  • Product Type : Screws
  • Screw Diameter (mm) : 4.2 mm
  • Pack Size : 200
  • Product Diameter : 4.2 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 200
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€10.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Floor-Tite Screws 4.2 x 55mm 200 Pack is rated 4.8 out of 5 by 21.
Rated 5 out of 5 by from Great screws, blue fingers! Do what they need to do, pulls boards down nice and tight. Features only got a 4 because the blue passivate(?) coating comes off on your fingers when you're holding them to start them off, and isn't easy to get off when you've driven a full pack into a floor in an afternoon. Still, I'll always come back to using them when I'm doing floorboards regardless
Date published: 2017-08-20
Rated 1 out of 5 by from Over-priced junk Not fit for purpose, in fact pretty close to garbage. Thes screws don't self start which increases the time required. These are supposed to screw into joists, cos that's what floorboards rest on, so they need to be able to take the torque of screwing into decent timber. The usual problem with cross head screws of any type, philips, pozi-drive, pro-drive is that they are designed to torque out above a certain torque, so you can't drive them in. Worse still you can't get them out, the heads will not take the torque and chew up. In contrast, some standard decking screws I had were far better. My assessment is these are over-priced, fancy coloured junk.
Date published: 2017-07-07
Rated 4 out of 5 by from Excellent Product Used these screws to fix new floor boards in my bathroom. Great product and not one bad screw. They can be removed but the heads wear quickly. Overall I would thourghly recommend
Date published: 2017-06-06
Rated 5 out of 5 by from Floor screws Great product, easy to drive. Not a single dud screw in the box.Spot on.
Date published: 2016-05-19
Rated 5 out of 5 by from Floortite Used to sort creaking chipboard floors. They drive easily and pull the boards down tight so no more creaks; great product.
Date published: 2015-10-17
Rated 5 out of 5 by from Excellent value screws I removed existing smaller screws in my 15 year old squeaky weyroc flooring and replaced them with these screws and they have sorted the noise.
Date published: 2015-03-23
Rated 5 out of 5 by from excellent floor screws These are great screws, no need for a pilot hole and they self countersink, they pull the flooring down solid with no creaking or movement.
Date published: 2014-06-12
Rated 5 out of 5 by from excellent floor screws These are great screws, no need for a pilot hole and they self countersink, they pull the flooring down solid with no creaking or movement.
Date published: 2014-06-12
  • y_2017, m_11, d_20, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_20
  • loc_en_IE, sid_49231, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie