Erbauer Diamond Tile Drill Bit 8 x 80mm Product Code: 85345

€23.95
Long life, fine diamond grit for a professional quality finish without chipping tiles. Easy to maintain, self-cooling and self-sharpening grit. Suitable for dry and wet cutting.

Features

  • Self-Cooling
  • Self-Sharpening
  • Fast Drilling Speed
  • Use on Full Speed for Best Results & Longer Life
  • No Need for Water
  • Will Drill the Hardest Porcelain Tiles
  • Diamond Grazed Tip
  • Wax Filled Centre

Specifications

Diameter: 8mm.
Additional Information
Technical Specification
  • Brand : Erbauer
  • Product Height : 10 mm
  • Product Length : 80 mm
  • Product Thickness : 10 mm
  • Product Type : Diamond Tile Drill Bit
  • Total Product Weight : 0.024 kg
  • Product Width : 10 mm
  • Product Depth : 0.01 mm
  • Pack Size : 1
  • Product Diameter : 8 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€23.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Erbauer Diamond Tile Drill Bit 8 x 80mm is rated 4.3 out of 5 by 36.
Rated 5 out of 5 by from Good bit Bought this to drill into some tiles I recently fitted great bit cuts the hardest tiles like butter. Also used on marble and it’s jusr awesome so I bought another
Date published: 2018-08-07
Rated 5 out of 5 by from Good bit. Tiled my bathroom with tiles a lot tougher than i thought.No normal masonary drill would touch them.Bought this,you have to take your time but it cut a nice clean,precise hole.Give it a try.
Date published: 2018-04-27
Rated 4 out of 5 by from Bit pricey but does the job Fitted a bathroom for a customer and tiled it in porcelain tiles which I know from past experience are like cast-iron. I knew I had at least a dozen fixing holes to drill so bit the bullet and shelled-out for this drill bit, a 22mm bit for two radiator pipes and the suction drill guide all by Erbauer. All worked a treat saving me a lot of time, stress and cracked tiles. The 8mm bit is worn-out after 18 holes but I won't hesitate to buy a replacement for my next bathroom job. The drill guide is awesome!
Date published: 2018-04-06
Rated 5 out of 5 by from 11mm porcelain, no problem!! Had to drill 11mm porcelain tiles to fix down a toilet and previous cheap drill bit just blunted and made no headway. Bought this and made a nice clean cut and went through the tile in minutes. Very impressed. There is wax up the inside of the drill bit, think it's function is to keep the drill cool. Expensive but does they job and can be used again and again. Recommended.
Date published: 2017-12-21
Rated 5 out of 5 by from Better than expected Bought this to drill into the underside of a quartz worktop to fit the clamps of an under mount sink. I asked the fitting company to drill them but when the top arrived they had not done it, I was worried if they had not done them I expected it to be a difficult to do. I set about it with doubts but it proved to be a wizz easy as! the drill using the guide drilled the hole perfectly and with ease. was a revelation. I can whole heartedly recommend this drill
Date published: 2017-08-20
Rated 5 out of 5 by from Best one yet I've tried various wet and dry bits over the years, some of them worked ok if a bit slowly, others were virtually useless. This Erbauer bit is the first one that has actually impressed me - quick and (so far) durable, exactly what I needed.
Date published: 2017-08-10
Rated 5 out of 5 by from Well wort the money I really wish I'd bough one of these months ago, before fitting towel rails onto our ceramic tiles, a job that hours. A new bathroom cabinet with 7 screw holes looked as though it would take days with existing tile drills. This bit breezed through the ceramic tiles within 20 minutes.I didn't bother with a guide, but started with a standard tile bit, expanded it slightly with a masonary bit to give a small hole through the surface. Then I went in at an agle and straightened. It really is worth the money.
Date published: 2017-04-23
Rated 5 out of 5 by from Use this for Porcelain Tiles Cant believe the difference in this tile drill and the other rubbish that is on the market. Ok it is expensive, but cuts through 10mm hard porcelain in minutes instead of hours. No water cooling required and works on high speed drills. What isnt there to like other than the price.
Date published: 2017-04-20
  • y_2018, m_9, d_20, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_36
  • loc_en_IE, sid_85345, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie