Erbauer Diamond Core Drill Bit 107 x 150mm Product Code: 28948

Excellent heavy duty grade bit for fast penetration in all types of concrete and masonry.

Features

  • Segment Height: 7.8mm
  • Wet & Dry Use

Specifications

Diameter: 107mm. Length: 150mm.
Additional Information
Technical Specification
  • Brand : Erbauer
  • Product Length : 150 mm
  • Product Type : Diamond Core Drill Bit
  • Pack Size : 1
  • Product Diameter : 107 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€18.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Erbauer Diamond Core Drill Bit 107 x 150mm is rated 4.6 out of 5 by 18.
Rated 3 out of 5 by from  Erbauer Diamond Core Drill Bit  Bought this to put two vents in. It had to go through over a foot of poured concrete . It went through no problem and value for money but i did have two teeth break off. so im not sure how long it would last for .
Date published: 2018-03-26
Rated 5 out of 5 by from Diamond purchase.. Purchased in conjunction with the Erbauer Core Drill Accessory Set 5 Piece Set (required to attach the Core Bit to my drill). Used it to cut a hole in my external wall for a 100mm extractor fan duct. First time I've cut such a hole and this certainly did the job well. The depth was just enough for me to begin from inside then using a pilot hole complete the cut from outside in. Gives a nice even hole, Very pleased with the results.
Date published: 2018-02-05
Rated 4 out of 5 by from Core blimey Great drill bit - no drama, solid and cuts well with minimal wear. Would definitely purchase again
Date published: 2017-11-16
Rated 5 out of 5 by from Great core bit. Bought to run ventilating ducting through cavity wall. Used it with an old sds plus drill and it easily cut through the concrete block and brick skin, leaving a clean finish. Only used it the once so far but no reason to suspect a different performance next time.
Date published: 2017-10-13
Rated 5 out of 5 by from great tool I think this tool is brilliant does the job perfectly.
Date published: 2017-09-29
Rated 5 out of 5 by from Better than expected It was a silly thing to do: to read the reviews after I had placed my order - and fortunate, because I probably wouldn't have bought the part if I had. I needed the bit to drill 3 holes through a wall of block-on-flat (220mm concrete block), plus 150mm Foamglass insulation. The insulation was very soft, but it made the drilling more awkward. After reading some of the reviews I had serious doubts that it was going to happen. Well, going first gear with a heavy duty rotary drill and clearing the dust out of the hole with a hoover several times after drilling about an Inch, it took about about one hour to get through (each hole)... but it did: 3 times and is still in good condition! Maybe the trick is clearing dust and taking your time with gentle pressure on the drill. Just make sure you do have the side handle of the drill mounted, you will need it.
Date published: 2017-04-23
Rated 4 out of 5 by from core drill cut quickly through block and brick wall ,did a neat job,
Date published: 2016-01-03
Rated 5 out of 5 by from Perfect hole cutter Bought to cut holes in lath and plaster ceiling for new lighting, went through the lot in seconds.
Date published: 2015-08-08
  • y_2018, m_6, d_18, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_en_IE, sid_28948, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie