Black Friday Event

Hurry Ends 26th November

Erbauer Diamond Core Drill Bit 152 x 150mm Product Code: 68843

Wet and dry cutting, high performance drill bit. Fast and long-life, suitable for hard materials including bricks and concrete blocks.


  • Segment Height: 7.8mm
  • Wet & Dry Use


Diameter: 152mm. Length: 150mm.
Additional Information
Technical Specification
  • Brand : Erbauer
  • Product Length : 150 mm
  • Product Type : Diamond Core Drill Bit
  • Pack Size : 1
  • Product Diameter : 152 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€62.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Erbauer Diamond Core Drill Bit 152 x 150mm is rated 4.2 out of 5 by 9.
Rated 4 out of 5 by from Effective 152mm core bit I've used smaller Erbauer core bits in the past and they have been fine. After reading the reviews for this larger dia' I was worried that it may not be up to the task of drilling two holes in the side of an old manhole (engineering bricks). It started off fine (using a large 1000w sds) but definitely slowed right down when reaching the ultra hard heart of the bricks - but we persisted and succeeded. Two of us taking turns on the drill took approx half a day - not too bad for engineering bricks.
Date published: 2018-07-16
Rated 4 out of 5 by from Electrician Review Good, solid piece of kit. Did exactly what it should. Nice sharp edged hole. But, my, was it slow work. Mind you, this was the first 152mm dia hole I've cut and maybe they do take a long time compared to smaller diameters.
Date published: 2017-11-17
Rated 5 out of 5 by from great tool does the job I bought this tool a few weeks ago and it did the job perfectly.
Date published: 2017-10-21
Rated 5 out of 5 by from Useful Bit of KIT A really useful piece of kit, made light work of a difficult job.
Date published: 2017-08-17
Rated 5 out of 5 by from Ronnie Core Bit This core bit or Ronnie as they're sometimes affectionately known did a cracking job to cut through a Victorian stone house for an extractor fan. It breezed through the internal block work and even when faced with a very brittle stone wall (which kept chipping in large chunks) it eventually cut into the stone and made it through. Presume it would easily cut through most masonary to be honest
Date published: 2017-07-31
Rated 4 out of 5 by from If you need a hole.. This does as it should, took about 4 mins to cut through a brick cavity wall, I would say it's quite expensive for what it is, material cost must be a small percentage of the price paid However if you need a hole for soil pipe and want to get the collar on the bend in the hole then this is the size you need
Date published: 2016-09-13
Rated 1 out of 5 by from Diamonds are forever?! Did I end-up with a 'duffer'? I purchased this to drill through a 110 year old solid 9" red common brick wall (to install a kitchen fan). I used my SDS until the core jammed at about 50mm of cut depth - the clutch on my SDS didn't operate and I was whacked - HARD - as the SDS spun, OUCH! Seems my SDS drill clutch had failed - the moral is do not use large diameter core drills with a powerful but clutchless drill. So a new SDS from Screwfix - a Titan and excellent this drill was. However the Erbauer core bit turned out to be rubbish... given that it took almost 5 hours 'solid' effort to get through the wall using the Titan at full revs - but without the hammer use, which shouldn't be required with any diamond cutting implement. I now need to cut a 125mm hole on the same wall for a boiler flu. I'll go for the Erbauer 127mm x 150mm diamond core drill bit - as a bit of an experiment really. Here's hoping my previous experience was atypical - I'll be leaving a review on the 127mm regardless.
Date published: 2016-05-26
Rated 5 out of 5 by from Value for money Bought to cut a few cooker hood vents, took it's time getting through the external house brick but no bother and went through internal block like butter. Solid construction and good value for the money compared to what you could pay. Could probably do with a little grease on the threads after use.
Date published: 2015-08-03
  • y_2018, m_11, d_15, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_IE, sid_68843, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie