Product Recall Notice: 285FX - Erbauer ERO450 150mm Random Orbital Sander - More Details

Erbauer Diamond Core Drill Kit 8 Pcs Product Code: 96229

A selection of 3 diamond core drills for fast, clean cutting and drilling in masonry, bricks and blocks. Suitable for wet and dry cutting. Supplied with accessories and carry case.


  • Wet & Dry Use
  • Professional Quality Diamond Core
  • 3 Popular Core Sizes
  • Includes 3 Cores & 5 Accessories
Additional Information
Technical Specification
  • Brand : Erbauer
  • Product Type : Diamond Core Drill Kit
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 8
Product Contents
3 x diamond core drills (38, 52 and 117mm), 200mm extension bar, 115mm SDS adaptor, 90mm 3-jaw adaptor, (8 x 205mm) pilot drill and 75mm drift key.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€83.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Erbauer Diamond Core Drill Kit 8 Pcs is rated 4.3 out of 5 by 195.
Rated 3 out of 5 by from Good core drill set but... This is a good quality diamond core drill set but be prepared that after you are finished with it, it will take a lot of strength, effort and frustration to take parts apart. It’s almost impossible. They should supply it with extension part and sds drill adaptor for each core drill bit so you will not need to take them apart...ever.
Date published: 2019-08-03
Rated 2 out of 5 by from one hit wonder Had a set of these years ago that I would be using all the time that were great but had them nicked out the back of my van. since then if I ever needed to drill a large hole I just borrowed a core bit off the builder on site, however I was fitting some fans for a customer and needed to get a set so I grabbed these based off past experience. Their quality have gone down hill big time, I was using the 117mm cutter and on the first hole it just about managed but took forever on the second (same wall, same thickness). if you are going to be doing lots of core drilling get a different set
Date published: 2019-08-02
Rated 5 out of 5 by from Great value core kit I wasn’t sure what core set to get but this one, exceeded my expectations.
Date published: 2019-07-20
Rated 5 out of 5 by from Good product does the job well Good quality product comes in a nice storage case. Comes with extender bar to get through cavity walls. Standard sizes for waste and tumble dryer vent.
Date published: 2019-06-28
Rated 5 out of 5 by from Very good for the price As a DIYer where these items will get limited use, the price is of great importance. These 'bits' were not too expensive and worked well through notoriously hard Whitehaven bricks.
Date published: 2019-06-28
Rated 5 out of 5 by from Core drill Great value, and did the job in hand with no trouble at all.
Date published: 2019-06-27
Rated 5 out of 5 by from Diamond core adapter Went through the brickwork like butter, very easy and a tidy job. Only downside, difficulty in getting the extension bar and ads adapter apart after use. Other than that, a great accessory.
Date published: 2019-06-19
Rated 4 out of 5 by from A great cutter Great cutter, brilliant box for storage. Only one drawback is it doesn’t come with a spanner to undo the attachments after use, tried monkey grips but can not undo. This makes putting back in to storage impossible as it won’t fit back in the box. Did the job perfectly though!
Date published: 2019-05-27
  • y_2019, m_8, d_16, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_195
  • loc_en_IE, sid_96229, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie