Energer ENB518HTL 200W Multi-Cutter 240V Product Code: 61122

Easy to use multi-cutter with 3.2° oscillation angle for sawing, scraping and sanding.


  • 200W
  • Variable Speed
  • Cutting Action
  • Slide On/Off Switch
  • Rubber-Overmould Grip
  • 18-Piece Accessory Kit


No. load speed: 11,000-20,000opm. Overall length: 286mm. Weight: 1.4kg. Will require adaptor (Code 28127) to use Bosch or Erbauer accessories. Includes Plug.
Additional Information
Technical Specification
  • Brand : Energer
  • Product Length : 286 mm
  • Product Type : Multi-Cutter
  • Power Output (Watts/Kw) : 200 W
  • Corded or Cordless : Corded
  • Total Product Weight : 1.4 kg
  • Model No : ENB518HTL
  • Pack Size : 1
  • Switch Type : Slide On/Off Switch
  • No Load Speed : 11,000-20,000 opm
  • Power Voltage Supply : 240 V
  • Carry Case/Bag Included : Yes
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
ENB518HTL, 2 x dust extraction adaptors (32 and 35mm), 1 x plastic sanding pad (unperforated), 1 x 35mm end cut blade, 1 x 80mm HSS semicircular saw blade, 15 x sanding sheets (5 x 80 grit, 5 x 120 grit and 5 x 180 grit), 1 x spare small flange, 1 x hex key and canvas carry bag.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€65.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Energer ENB518HTL 200W Multi-Cutter 240V is rated 4.2 out of 5 by 109.
Rated 1 out of 5 by from Not fit for purpose I bought this multi tool specifically to cut nails, as the specs say it will. However the blade supplied does not do this. In fact it says wood on the blade & trying to cut through a nail merely blunted the teeth. Very disappointed & will be returning this.
Date published: 2017-10-18
Rated 5 out of 5 by from Never do DIY without this tool Why have I never had one of these before? I've just used it to cut out some floor boards for a wetroom floor former - perfect! Cuts close to the wall with ease. Where I would previously have had to use hammer and chisel, I was able to get a clean edge cut against the wall on 3 sides (about 3.5 meters in all) with this tool. Used it to cut out several half lap join in some framework too - so much easier than chiselling. Only done these two jobs with it so far, hence only 4 stars for reliability. Seems well built and sturdy though, so don't foresee any issues. Already feel I've had my moneys worth anyway.
Date published: 2017-08-20
Rated 5 out of 5 by from Great value with a case Has a handy vacuum adapter which didn't really fit my dyson but I managed to make it work which makes the job a lot tidier it worked really well cutting plasterboard and wood highly recomended
Date published: 2017-08-20
Rated 5 out of 5 by from one very handy tool very good value for money have used this for many tasks would not be without it , been used now for over a year now still going strong would recommend
Date published: 2017-08-02
Rated 4 out of 5 by from Multicutter Great tool for all the difficult jobs, like cutting scribed skirting and architrave and other jobs that can't be done with hand tools and a jigsaw.
Date published: 2017-07-28
Rated 5 out of 5 by from multi tool its a good tool for getting into areas your jigsaw can not get
Date published: 2017-06-12
Rated 1 out of 5 by from Energer multi tool 200W mains Burnt out after 1hr of getting it home even stopping regularly for cooling it
Date published: 2017-06-11
Rated 1 out of 5 by from Unusable Terrible. Purchased one and the screw that holds the blades in kept undoing itself. No matter how tight I done it within a minute it had loosened and the blades just jangle. I took it back and exchange it for another and it was the same. Ended up exchanging it for a different make
Date published: 2017-06-02
  • y_2017, m_11, d_23, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_109
  • loc_en_IE, sid_61122, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie