Dual Fuel Towel Rail Elbow ½" Product Code: 56801

Use opposite dual-fuel electric elements for symmetrical installation. Brass construction.


  • Chrome-Plated


. Length: 15mm. Weight: 142.0kg.
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Length : 15 mm
  • Product Type : Dual Fuel Towel Rail Elbow ½"
  • Total Product Weight : 142.0 kg
  • Model No : Dual Fuel Elbow for Towel Rail Elements
  • Colour : Chrome Plated
  • Pack Size : 1
  • Product Diameter : 15 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€7.15 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Dual Fuel Towel Rail Elbow ½" is rated 4.2 out of 5 by 17.
Rated 5 out of 5 by from Essential Essential when fitting a towel radiator element. Ignore the 'O' ring, complete waste of time, plenty of PTFE to make the seal. Nice and shiny and looks good though!!
Date published: 2018-02-22
Rated 4 out of 5 by from Does the job Good quality and fitted easily. Solved my problem of needing a 90 degree bend to reach existing pipes . Follow the advice to use PTFE tape for a good water tight seal first time.
Date published: 2017-09-23
Rated 5 out of 5 by from Does the job perfectly Needed elbow to use on towel radiator i was installing at home. Did the job perfectly, fitted in with Flomasta radiator i installed. Over a year down the line not one leak has occured.
Date published: 2017-08-10
Rated 5 out of 5 by from Just The Job I needed to switch the feed to my new towel radiator by 90 degrees and two of these did the trick. As mentioned by others to achieve the correct alignment you need to ignore the rubber O rings and seal with PTF tape. They did the job & look great.
Date published: 2016-09-05
Rated 5 out of 5 by from reccomended Good quality and looks great, it solved a problem with tap shower
Date published: 2016-04-16
Rated 5 out of 5 by from Towel rail connection Towel rail did not come with fixings but these done the job. Had to remove rubber seals and fit using tape as it was near impossible to align connections using the aeals
Date published: 2016-01-20
Rated 5 out of 5 by from Useful dual fuel elbow Very useful fitting made to match the tee piece supplied with the electric element for towel rail radiators, so that both flow and return pipes can be side entry. Reasonably priced too.
Date published: 2015-01-26
Rated 5 out of 5 by from Resolved a Venting Problem Chrome bathroom radiator not venting properly due to poor design(Non-ScrewFix). Used this product in-between the bleed valve and the radiator, raised the height by a further inch, problem solved. Quality item.
Date published: 2014-08-26
  • y_2018, m_4, d_24, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_en_IE, sid_56801, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie