Drayton HTS3 Cylinder Stat Product Code: 95630

€21.95
Bi-metallic sensor. Surface-mounted. Positive on / off setting.

Features

  • Suitable for All Systems
  • Fixing Strap Included
  • Double-Insulated
  • Energy Saving Trust Recommended
  • Fixing Strap Included
  • Double-Insulated

Specifications

Switch/contact rating: 3(1)A 230V AC SPDT. Temperature range: 50°-80°C. H x W x D: 100 x 40 x 45mm.
Additional Information
Technical Specification
  • Brand : Drayton
  • Product Height : 100 mm
  • Product Type : Cylinder Stat
  • Insulation Type : Double-Insulated
  • Central Heating Control Type : Thermostats
  • Model No : HTS3
  • Product Width : 40 mm
  • Temperature Range : 50 to 80 °C
  • Product Depth : 45 mm
  • Pack Size : 1
  • Suitable System : Suitable for All Systems
  • Power Voltage Supply : 230 V
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • Mount Type : Surface-Mounted
  • Sensor Type : Bi-Metallic Sensor
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€21.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Drayton HTS3 Cylinder Stat is rated 4.4 out of 5 by 36.
Rated 5 out of 5 by from Good as expected Simple swap out of my old tank thermostat. This is easily set up as NC or NO (normally closed or open). It’s a lot more accurate than the old one which was worn out.
Date published: 2019-03-03
Rated 5 out of 5 by from Cylinder stat Easy to install and always found this product reliable.
Date published: 2019-02-21
Rated 5 out of 5 by from Replacement cylinder stat Replacement hot water cylinder stat, old one becoming inconsistent in temp. Looked at several, bought this and was 10mins swap over, undo the cables from previous stat - noting what colour goes to C / 1 / 2 and attach cables to new stat. Strap to cylinder, set your temp and away you go :)
Date published: 2019-01-12
Rated 5 out of 5 by from Drayton cylindr stat Easy to fit, direct replacement for standard british gas stat, 10 minute job!
Date published: 2018-12-29
Rated 5 out of 5 by from Drayton cylinder stat Very good value and extremely easy to fit, doddle of a job.
Date published: 2018-12-19
Rated 4 out of 5 by from Easy fit I bought this cylinder thermostat to replace a broken old type stat. Straight forward swap with easy installation instructions enclosed.
Date published: 2018-12-16
Rated 4 out of 5 by from Temperature keeper... Bought to replace a faulty cylinder stat at home and chose this one due to the small setting dial helping to avoid inadvertent set-point changes. Comes with all the parts required to fit to the cylinder and sits snugly against the sidewall. Cable entry is a little cosy using 1.5mm2 3 core flex but with careful cable prep this isn't a big issue. There is no terminal for the (not required) earth cable which would be my only real negative comment. Yes, it'll do the job required of it. Don't fully expect any long term issues but that is down to the contact design.
Date published: 2018-12-09
Rated 3 out of 5 by from Good But!!! This product performs as it is meant to up to a point. It is easy to fit and wire up from new or use existing wiring if replacing a like for like unit as I did. The down side is that the tolerance of the setting is plus or minus 8 degrees. So if you set the unit to 60 degrees, which seems to be the accepted norm, it can be working at between 52 and 68 degrees which has been confirmed to me by Drayton, not great accuracy.
Date published: 2018-12-08
  • y_2019, m_5, d_24, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_36
  • loc_en_IE, sid_95630, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie