Diamond Core SDS Plus Arbor Product Code: 27287

Through-hardened for constant strength. Tough construction to withstand high torques. Should only be used with machines fitted with a clutch.


  • Tapered TCT Guide Drill
  • No Pre-Drilling Necessary
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Height : 50 mm
  • Product Length : 150 mm
  • Product Type : Diamond Core SDS Plus Arbor
  • Total Product Weight : 0.15 kg
  • Product Width : 50 mm
  • Pack Size : 1
  • Manufacturer Guarantee : 2 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€10.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Diamond Core SDS Plus Arbor is rated 2.6 out of 5 by 13.
Rated 5 out of 5 by from Good Quality Arbor Good solid tough arbor, have used for a 152mm diamond core drill through breezeblock and brick - no problems.
Date published: 2017-08-20
Rated 3 out of 5 by from Gods value If drilling through 30 cm wall get a longer arbor.
Date published: 2017-07-03
Rated 1 out of 5 by from Useless Bought this as a replacement as id lost my other one. Only got to use it once as it snapped in half while coring out for a new SVP. Thought i would save money buying this product but had to spend twice as much buying a replacement. Lesson learnt the expensive way
Date published: 2017-04-13
Rated 4 out of 5 by from Good Value Used once with a 28mm core drill and did the job as you would expect. I dont think this part would fail when keeping the drill speed low for this type of job.
Date published: 2017-03-19
Rated 1 out of 5 by from Use once only! Agree with most of the less than pleased reviews on the item. 4 inch core drill through brick, use once and discard as flutes twist and can prove difficult to remove from drill. (New Titan drill, accessories new, no excuses for it) Sadly, haven't found alternative item to buy from anywhere else, so keep having to use a new one each time! Adds to the cost of the job.
Date published: 2016-08-02
Rated 1 out of 5 by from Poor quality Did not last one morning of moderate use. Very soft steel used. SDS fitting jammed in the drill chuck and had to replace drill. Arbor bent quite easily becoming useless.
Date published: 2016-02-25
Rated 1 out of 5 by from Totally useless Bought this for use with my Titan SDS drill. After drilling one 50mm hole with my core drill I noticed that the shaft of the Arbor had twisted and the SDS flukes on the Arbor shaft were bent out of shape. This made it very difficult to remove the Arbor from my drill, which could have proved costly because the drill would have to have been written off too. Why don't the company who manufacture this Arbor use the same hard steel that they use to manufacture the drill bits. Buy with caution.
Date published: 2016-02-21
Rated 2 out of 5 by from Beware - choose carefully the SDS fitting is quite soft metal. I used as recommended with a core drill having a clutch, and was drilling 152mm dia for a fan through brick / block wall. It snatched and twisted the SDS grouve into a spiral, I had to use a vice and hammer to remove. Screwfix replaced, Even without incident , the replacement is showing marks in the metal from the drill chuck. Summary - may be OK for smaller cores, avoid if using larger diammeter, or tough material which may produce high torque.
Date published: 2016-01-10
  • y_2017, m_11, d_22, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_IE, sid_27287, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie