Cooke & Lewis CLCGS90 Curved Glass Hood Stainless Steel 900mm Product Code: 926FH

Helps to remove cooking odours and illuminates the cooking area.


  • 3 Speeds
  • Extraction Rate 338m³/hr
  • Extracts & Recirculates
  • Dishwasher-Proof Grease Filter
  • Push-Button Switch
  • 2 Year Manufacturer's Guarantee (T&Cs Apply)
  • Dishwasher-Proof Filter
  • LED Light


220-240V. Duct dia: 150mm. Noise level: 62dBA. D x H: 470 x 625-915mm.
Additional Information
Technical Specification
  • Product Width : 900 mm
  • Sound Pressure Level : 62 dBA
  • Model No : CLCGS90
  • Product Height : 625-915 mm
  • Pieces in Pack/Case : 1
  • Product Type : Curved Glass Hood
  • Manufacturer Guarantee : 2 Year Manufacturer's Guarantee (T&Cs Apply)
  • Parent Colour : Silver
  • Pack Size : 1
  • Product Depth : 470 mm
  • Cooker Hood Type : Chimney
  • Functions : Extracts & Recirculates
  • Appliance Product Type : Cooker Hoods
  • Extractor Fan Control Type : Push-Button Controls
  • Power Voltage Supply : 220-240 V
  • Switch Type : Push-Button Switch
  • Extraction Rate : 338 m³/hr
  • Appliance Finish : Stainless Steel
  • Brand : Cooke and Lewis
  • Duct Diameter : 150 mm
  • Colour : Stainless Steel
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€127.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Cooke & Lewis CLCGS90 Curved Glass Hood Stainless Steel 900mm is rated 4.0 out of 5 by 2.
Rated 5 out of 5 by from Extractor Fan Great extractor fan,very good value for money, easy to instal and looks the part
Date published: 2018-12-09
Rated 3 out of 5 by from Good, but Plus points are overall appearance and low price. Negatives are relatively flimsy steelwork, poor access for screwing main body to wall, and poor design of bracket at top of chimney hood. This was bought to replace a 14-year-old Bosch cooker hood, so it is hardly a like-for-like comparison in terms of features and quality of construction – however, the cost is a mere fraction of the Bosch. The cooker hood is broadly similar in appearance, but the chimney is quite flimsy. Alright when secured in place, but probably needs a bit of care when cleaning. The installation instructions are not particularly clear, and it would have been helpful to have had a full-size template included for the location of the holes for securing to the wall. It was not possible to remove the fan and motor unit from the main body (although the instructions did imply this should be the case), and as a consequence it was very difficult to get a hand inside the body to tighten up the screws – I did manage it eventually, though. I suggest you use your own wall plugs, as those included didn’t seem to hold very well inside a 6mm hole. My main criticism is that the bracket securing the top of the chimney hood to the wall is grossly deficient in two areas. Firstly, it has to be fitted with a spacer to accommodate the wrap-round lip on the chimney (I used a washer), but there is no mention of this in the instructions. So this required removal and re-fitting. Secondly, the screws which held up the top of the chimney were fractionally too small in diameter for the pre-drilled holes in the bracket, and could not therefore be tightened sufficiently to hold up the top (there is a slot to allow an amount of vertical adjustment). Having once again removed the bracket from the wall, I did manage to find two self-tappers of a suitable size in my workshop.
Date published: 2018-09-16
  • y_2019, m_5, d_24, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_IE, sid_926FH, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie