Repair Fitting 15 x 100mm Product Code: 85529

€5.15
Repairs.

Features

  • Compression
  • For Use on Hot & Cold Systems
  • Fully Recyclable Products

Specifications

EN 1254-2.
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Length : 100 mm
  • Product Type : Repair Fitting
  • Total Product Weight : 0.15 kg
  • Connection Type : Compression
  • Pack Size : 1
  • Suitable System : For Use on Hot & Cold Systems
  • Product Diameter : 15 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • CE Standard (Tested to EN...) : EN 1254-2.
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€5.15 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Repair Fitting 15 x 100mm is rated 4.9 out of 5 by 16.
Rated 5 out of 5 by from Burst water pipe go to screwfi A very economical way to permanently repair a burst water pipe.
Date published: 2018-03-28
Rated 5 out of 5 by from Just the job. Great for when you need to cut out (rather than slide off) a compression fitting (valve or whatever) to replace it because the fitting is between fixed pipes. Use the repair fitting next to the new fitting and the copper tube slides inside the repair fitting giving sufficient manoeuvrability to reconnect.
Date published: 2018-01-25
Rated 5 out of 5 by from DIY'ER Allows you to fit to pipes you can't move ends of. Solid construction.
Date published: 2018-01-01
Rated 5 out of 5 by from Did the job nicely Just be careful you do not need this to fill a 100mm gap (such as cutting out an old stopcock) as the pipe will need to be inserted into the ends of this by about 15mm. other than that very handy indeed, wish they would do a 150mm version as well
Date published: 2017-08-20
Rated 5 out of 5 by from 1st class solid fitting I bought 2 of these and a 1 spare to remove 2 push fit isolation valves ( one was leaking) as I had already 2 isolation valves 60cm away I just replaced the 2 push fit valves on the shower unit in the loft with these - easy task Solid construction and fit for purpose hope I never have to use the spare but worth keeping one in hand
Date published: 2017-08-17
Rated 5 out of 5 by from When you can't move the pipes Allows you to fit items such as an isolation valve in a length of pipe when you can't move the ends of the pipe. Cut out a section of the pipe, and the repair fitting slides onto one cut end quite a distance. It can then be slid forward before tightening the compression joint.
Date published: 2016-12-01
Rated 5 out of 5 by from Excellent fix Amazingly useful for when one of your below average intelligence employees decides to screw the floorboard back down through the central heating pipe below. I would suggest carrying two in stock (as I will be), just in case they screw both ends of the board through the pipe next time.
Date published: 2016-05-28
Rated 4 out of 5 by from Lifesaver repair kit This pipe repair is a lifesaver if you have accidentally gone through a pipe this product is a lifesaver easy to use doses the repair with the minimum amount of fuss Great product !!
Date published: 2016-03-01
  • y_2018, m_4, d_20, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_en_IE, sid_85529, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie