British General 1-Gang 2-Way 400W Push Dimmer Switch White Product Code: 65335

Robust, square-edged profile.


  • Push-On/Off with Rotary Dimming


EN 60669-2-1.
Additional Information
Technical Specification
  • Brand : British General
  • Product Height : 86 mm
  • Product Type : Dimmer Switch
  • Total Product Weight : 0.1 kg
  • Model No : 981P
  • Switches & Sockets Product Type : Dimmer Switch
  • Switches & Sockets Finish : Plastic
  • Product Width : 86 mm
  • Parent Colour : White
  • Colour : White
  • Product Depth : 70 mm
  • Pack Size : 1
  • Switches & Sockets Profile Type : Raised Square
  • No. of Ways : 2
  • Power Voltage Supply : 240 V
  • No. of Gangs : 2
  • Manufacturer Guarantee : 25 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
  • CE Standard (Tested to EN...) : EN 60669-2-1.
Product Contents
Fixing screws, screw caps and installation instructions.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€13.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
British General 1-Gang 2-Way 400W Push Dimmer Switch White is rated 4.1 out of 5 by 27.
Rated 5 out of 5 by from No Problem Ordered this dimmer switch on line at about 9 a.m on a Sunday morning. Within a minute or two got confirmation that it was ready to pick up. Collected it and was back home and had it fitted by 10 a.m.
Date published: 2018-04-10
Rated 1 out of 5 by from Dead on arrival Faulty out of the box, would not even switch on. Tried with a selection of bulbs.
Date published: 2018-02-13
Rated 4 out of 5 by from Dimmer switch This does work with dimmable LED's, but there is still a flicker at one point. Not an isolated case as I bought two switches and they both have the bulbs flicker at the same point. Overall though not too bad - livable.
Date published: 2018-02-12
Rated 2 out of 5 by from Only if you like flickering Oh dear. In a room of 7 dimmable LEDs I got a flicker at full power no matter what setting. Back to screwfix it goes. Given the LAP LEDs Also from screwfix....disappointed
Date published: 2017-12-08
Rated 5 out of 5 by from Works with dimmable LED bulbs Easy to fit and has good instructions. Can be adjusted to dim LED bulbs with 4th screw on the back. Bulbs buzzed with an older dimmer switch. No buzz when adjusted. Works well. Very neat fitting with cover caps for the screws.
Date published: 2017-10-24
Rated 2 out of 5 by from Unsuitable for LED dimming Used this with 3nr Osram dimmable LED lamps - 9w each. Flickered badly, no matter how I set the switch up. Going to try a trailing edge dimmer from varilight instead. This was easy to install, and would be ok for incandescent bulbs... although theres a very slight buzz which would eventually drive me insane.
Date published: 2017-01-22
Rated 4 out of 5 by from Great dimmer After trying All the brands for led screw fix had, this one was the one. Does a little noise but it is so low that you will need to be seating next to it to hear it. With All the other brands, the led lights (9 of them) were flicking on low settings, with this dimmer you can get the right setting for you by adjusting it via a little screw at the back. Does the job for me
Date published: 2016-12-14
Rated 2 out of 5 by from Not great quality I bought one of these about a year ago and now i am replacing it again. Started giving problems after about 8 months and stopped working completely around 12 months
Date published: 2016-11-19
  • y_2018, m_4, d_23, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_IE, sid_65335, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie