Coupling 15mm x 12mm Product Code: 88346

C x C brass couplings.


  • Compression
  • Brass
  • For Use on Hot & Cold Systems
  • Fully Recyclable Products


EN 1254-2.
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Type : Coupling
  • Construction Material (Plumbing) : Brass
  • Connection Type : Compression
  • Colour : Brass
  • Pack Size : 1
  • Suitable System : For Use on Hot & Cold Systems
  • Product Diameter : 15 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • CE Standard (Tested to EN...) : EN 1254-2.
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€3.55 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Coupling 15mm x 12mm is rated 5.0 out of 5 by 23.
Rated 5 out of 5 by from Good value, does what it says Going d quality and value, does what it needs to do
Date published: 2018-09-10
Rated 5 out of 5 by from Experienced.... Carpenter Thought I'd found myself a bargain when fitting a kitchen, only to discover that the taps with no english instructions and a foreign stamp on the parcel had flexi hoses that were smaller than 15mm. Screwfix didn't only stock the part, but was also open bank holiday monday to allow me to finish off. Great service and product.
Date published: 2018-05-08
Rated 5 out of 5 by from Good product I brought this to reduce for tap connector flexi hose. Good quality and work perfectly.
Date published: 2017-10-06
Rated 5 out of 5 by from Perfect to attach 12 tap tails Like many other reviewers, used these to connect 12mm tap tails from a Grohe sink mixer to standard 15mm pipes. Perfect for the job. Most newer high-end european mixers will have 12mm connectors on the tails, so you should keep a couple of these in your toolbox if you're a fitter.
Date published: 2016-12-17
Rated 5 out of 5 by from Perfect Seal No Leaks Used this as a quick fix adaptor for some bathroom taps, sealed perfectly on the 15mm side but used the 10mm side without an olive and into a flexi hose (I know that's not what it's designed for!) Ended up changing the whole piece for an iso valve and adaptor so can't comment on reliability, but did it's job fine for the small time it was used
Date published: 2016-11-02
Rated 5 out of 5 by from THE part I needed Trying to fit some Continental taps that come supplied with flexible hoses that look just like standard 15mm parts but they are too small when you try to fit them. Screwfix, their very helpful staff and this little part to the rescue. Quite literally the only way to make the taps fit!
Date published: 2016-02-22
Rated 5 out of 5 by from tap tail adaptor needed a coupler for grohe monoblock tap tails 3/8 bsp thread and being a retired engineer took a guess that 15mm to 12mm coupler would have a 3/8 thread on the 12mm side and was right ! will keep a couple of these fittings in my toolbox in case i come across this size of tails again !
Date published: 2016-01-04
Rated 5 out of 5 by from handy size Handy size for the odd connections on some appliances with a 12mm connection , a must have in the bag item .
Date published: 2015-11-17
  • y_2019, m_7, d_19, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_23
  • loc_en_IE, sid_88346, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie