Black Friday Event

Hurry Ends 26th November

Bosch S1543HM Brick Sabre Saw Blade 240mm Product Code: 70198

€23.95
Specialist brick-cutting blade that cuts brick, porous concrete, limestone and cement composite boards. Cuts small bricks up to 150mm. 2tpi.

Features

  • Coarse Cut
  • Model No: S1543HM

Specifications

Length: 240mm. 2tpi. Progressive tooth pitch: 2mm. For bricks up to 365mm.
Additional Information
Technical Specification
  • Brand : Bosch
  • Product Length : 240 mm
  • Product Type : Brick Sabre Saw Blade
  • Model No : S1543HM
  • Pack Size : 1
  • Type of Cut : Coarse Cut
  • Suitable Sawing Material : Brick
  • Teeth Per Inch (TPI) : 2
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€23.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Bosch S1543HM Brick Sabre Saw Blade 240mm is rated 4.3 out of 5 by 42.
Rated 5 out of 5 by from Did the job Bought this to cut a 4" concrete sewer pipe, did the job in 5 minutes. Still in good condition
Date published: 2018-08-27
Rated 4 out of 5 by from Bosch Brick Blade Used this to cut out for new internal lintel and doorway. It performed very well (although the wall comprised of plastered Celcon block, which is fairly soft. However, it got the job done and was much tidier than the cutting wheel I would normally use had the building been empty. I have also used it to "tooth out" brickwork mortar for some external repairs and again it went v.well. so far showing no sign of blunting. I used the blade in my Makita Recip saw.
Date published: 2018-08-08
Rated 4 out of 5 by from okay (ish) fast through blocks, slower through building bricks, very slow through render. much less mess than an angle grinder or stone cutter and much less room for 'oops' moments. vacuum cleaner held by a willing partner should get most of it.
Date published: 2018-08-06
Rated 5 out of 5 by from Excellent for cutting clay Used this to cut a clay pipe about 200mm diameter. This was already a few feet down so using a quick cut was going to need even more working room. Using the reciprocating saw meant that the pipe could be cut while still resting on the clay bed - there was no need to support it specially. Even after this job there's life in the blade for some other use.
Date published: 2018-07-23
Rated 3 out of 5 by from Good but with reservations Bought to cut brick around joists in a tight spot. Did it eventually but did have problems when it seemed to hit pebbles in the old bricks and no way of rotating the blade around them, but got it done with a bit of messing around. I would recommend
Date published: 2018-07-23
Rated 5 out of 5 by from Cuts great Used to replaced shelled bricks cut through morter joints like going through butter
Date published: 2018-07-09
Rated 3 out of 5 by from Mixed review Bought mine around 18 months ago and have used it a handful of times for a few minutes each time. Today whilst trying to cut out some bricks from a wall I noticed it was not doing much. Looked at the blade to see half the teeth missing from it. Worked great when it had teeth, but not so good the teeth fall out after such minimal use.
Date published: 2018-06-15
Rated 4 out of 5 by from Great blade but... I'm glad I bought this as it will come in handy for cutting mortar joints but it didn't manage the job I had planned - it cuts through mortar like butter but it struggles with bricks - I tried to cut a doorway through only 20 courses of bricks. After the first two I gave up and used my angle grinder to cut through the front of the bricks and used this to cut the other half. It's fairly dust free but very slow and fairly blunt now after the equivalent of only 10 bricks.
Date published: 2018-05-24
  • y_2018, m_11, d_15, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_42
  • loc_en_IE, sid_70198, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie