Christmas Delivery Times

ASD Black BC PIR Slave Half Lantern Wall Light PIR Included 60W Product Code: 45075

€27.45
Polycarbonate.

Features

  • IP44
  • Curved, Low Profile Design
  • PIR Sensor - Detection Range
  • Max. Wattage: 60W
  • 1 Year Guarantee
  • PIR

Specifications

240V. W x D x H: 182 x 115 x 388mm. 1 x BC lamp required. Fixings Supplied. Weight 0.85kg.
Additional Information
Technical Specification
  • Brand : ASD
  • Product Height : 388 mm
  • Product Type : Slave Half Lantern Wall Light PIR Included
  • Power Output (Watts/Kw) : 60 W
  • IP Rating : IP44
  • Model Name : Half Lantern
  • Fixings Supplied : Fixings Supplied
  • Cap Fitting : BC
  • Total Product Weight : 0.85 kg
  • Model No : HL/BK060P
  • Design Type : Curved, Low Profile Design
  • Product Width : 182 mm
  • Dimmable : Non-Dimmable
  • Colour : Black
  • PIR : PIR
  • Product Depth : 115 mm
  • Pack Size : 1
  • Max. Wattage : 60 W
  • Power Voltage Supply : 240 V
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€27.45 Incl. 23% VAT

Add to Wishlist

Included in this price is a contribution to recycling costs of €0.15 (€0.12 ex VAT)

More Items to Consider

Loading... Loading...
1
ASD Black BC PIR Slave Half Lantern Wall Light PIR Included 60W is rated 4.1 out of 5 by 74.
Rated 4 out of 5 by from Looked good Unfortunately this was too big and had to be returned.
Date published: 2018-12-07
Rated 4 out of 5 by from Easy to Install Lantern Easy to install with switch controlled test and overide facility. Good choice for a replacement. Looks good and it won't corrode as it is made of plastic. Will fit more of these. NB. Matching light available without PIR and both in white too. Perfect!
Date published: 2018-12-02
Rated 5 out of 5 by from Lovely Well made light I bought this lamp to add a little security and convenience to my Shed at the bottom of my garden, Easy to fit and well made from ABS Plastic i believe. Very nice stylish lamp. push fit wiring terminals are a lovely touch. One thing I would like to add. If you (like me) have added a switch as per the instructions, be aware that this remote switch is not designed to switch the entire unit on or off, it is in fact a PIR override switch... so when you have it in the ON position it is overriding the PIR and light sensor and the lamp will stay on (even in daylight) you have to switch the remote switch off to allow the PIR to do its job (in darkness) the instructions are a little ambiguous regarding turning the power supply on and off 2-3 times to make the lamp stay on for 8 hours. Don't confuse this action with wiring in and using a remote switch 2-3 times... this only overrides the PIR. nothing else.. the power supply they refer to is the MAINS supply. So if like me you are left scratching your head when the lamp wont go into PIR detect mode, and just stays on permanently.. you may find you have the remote switch in the on position. Switch it off, and hey presto when the daylight fades... the PIR is active and everything works as it should! Happy man now! shame the PIR and time delay cant be adjusted.. but its fine.
Date published: 2018-11-26
Rated 5 out of 5 by from Great value and easy to instal Very simple light, just wire it up and screw it to the wall and thats it, job done. Terminals are good as they are push down and fit, rather than screws which makes it quick and easy. Will start working once it gets dark and movement is detected. There is a test mode for daytime if you switch it on and off three times. Be aware that you cant adjust the PIR, so it will only work in one configuration of range/darkness etc. Also no fixings are provided, so you will need to use your own plugs/screws.
Date published: 2018-11-06
Rated 5 out of 5 by from Excellent front door security Well made, good value, easy to follow instrutions, will buy again, recommend 100% used a BC GLS LED VIRTUAL FILAMENT LIGHT BULB 600LM 6W that works fine and keeps the running costs down and gives good light
Date published: 2018-10-21
Rated 5 out of 5 by from Good product, good price! I bought this product and o am happy . The sensor, have good range
Date published: 2018-09-27
Rated 4 out of 5 by from Decent security light. Easy install, quality pretty good. Works well. Seal isn’t amazing though. Has led bulb so used some sealant to make sure no leakage.
Date published: 2018-08-24
Rated 4 out of 5 by from Does the job well. Bought this to light up the back door area,which is normally in darkness. Didn't want to leave a light on all the time. Didn't want to use overkill with a security spotlamp. It provides the perfect amount of light for us to use the back door as an entry point.works very well. Very easy to fit.
Date published: 2018-07-13
  • y_2018, m_12, d_16, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_74
  • loc_en_IE, sid_45075, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie