Aqualisa Aquavalve Rear-Fed Built-In Chrome Thermostatic Mixer Shower Product Code: 32030

€236.95
Mixer showers use water from both your hot and cold water systems to create the perfect shower temperature. To increase performance you can add a pump: if you have a gravity-fed system. Maintains constant water temperature. Limescale-resistant. Pre-set maximium temperature.

Features

  • Suitable for All Plumbing Systems
  • Delivers 18Ltr/min at 0.1bar
  • Concentric
  • 3 Year Manufacturer's Guarantee (T&Cs Apply)
  • Rotary Power Control
  • Rotary Temperature Control
  • Riser Rail
  • 3-Spray Pattern Shower Head
  • Aqualisa Trusted Thermostatic Technology
  • Safe for the Whole Family

Specifications

W x D x H: 185 x x 185mm. Pipe centres: 150mm. Fixings & Fittings Supplied. Min-max. pressure: 0.1-10bar. Max temperature: 65°C. Automatic Water Failure Shutdown. Single Outlet. Head size: 90mm. Weight: 2.77kg.
Additional Information
Technical Specification
  • Brand : Aqualisa
  • Control Type : Separate Flow & Temperature Controls
  • Valve Type : Built-In
  • Model Name : Aquavalve
  • Flow Rate (Ltr/Min) : 7 Ltr/min
  • Model No : 32030
  • Pieces in Pack/Case : 1
  • Product Height : 185 mm
  • Product Type : Mixer Shower
  • No. of Spray Patterns : 3-Spray Patterns
  • Temperature Control Type : Rotary Temperature Control
  • Fixings Supplied : Fixings & Fittings Supplied
  • Total Product Weight : 2.77 kg
  • Product Width : 185 mm
  • Pressure Suitability : Suitable for High & Low Pressure Systems
  • Colour : Chrome
  • Pack Size : 1
  • Pipe Centres Size/Range : 150 mm
  • Max Water Temperature : 65 °C
  • Minimum Bar Pressure : 0.1 bar
  • Manufacturer Guarantee : 3 Year Manufacturer's Guarantee (T&Cs Apply)
  • Maximum Bar Pressure : 10 bar
Product Contents
Mixer shower with valve, riser rail and shower head.
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€236.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Aqualisa Aquavalve Rear-Fed Built-In Chrome Thermostatic Mixer Shower is rated 4.4 out of 5 by 28.
Rated 4 out of 5 by from Looks Good Looks good. Can't say too much yet as not yet been installed. Replacement for an existing one (different brand) which had got old and unreliable (thermostatically).
Date published: 2018-04-16
Rated 4 out of 5 by from Good Quality A decent shower giving good delivery, relatively easy to install. I'm not crazy about how the shower head cradle operates, compared to all the others but this is a small matter. Overall a good middle-of-the-road item.
Date published: 2018-02-13
Rated 3 out of 5 by from Not as good as they were!!! OK, I've fitted many of these over 30 years prior to the last 10, in saying that who fits this type from the off now? Not fitted one for around 10 years now. Ok if you've got one fitted and you can 'get in' from the rear without damaging the tiles etc ok. But I would recommend you fitted a shower unit where you can just fit a new by undoing two nuts. Now why have Aqualisa stated you require a 130mm hole?? No you don't at all, if your going in from the rear it 90mm in the tile and if your going in from the front you can make whatever size you wish in the blockwork etc and then just a 90mm hole in the tile once again when you fit it. Just pop some tape around the chrome bit. These are now plastic and wont last anywhere near the 30 years you used to get out of them. They used to have a large percentage plastic on the old ones but it was in a different league. If you push the flow control knob on to far it will catch the temp control, bad design and try adjusting the flow with wet soapy hands. Why do manufactures seem to be going backwards with products? Is it worth the money? only if you have one fitted and you can get to the pipework from the rear. To cut the existing tile in situate to the larger dia just use a tile cutting round hacksaw blade you know the type. If you have to break the tiles don't purchase this type of shower period. I'll be back to this one before the warranty runs out I think, hope I'm wrong.
Date published: 2018-02-04
Rated 5 out of 5 by from Aqualisa shower Not yet installed, but last one installed in our previous house was excellent all round, looks good and did the job.
Date published: 2018-01-20
Rated 5 out of 5 by from Aqualisa 609 This was a an identical replacement of 10+ year old Aqualisa 609 shower. Very quick efficient service. Obviously as I bought the same again I like this model very much
Date published: 2017-12-11
Rated 5 out of 5 by from Aquavalve 609 A proven star performer, outstanding value. External design is now dated for a modern style bathroom, but it is a perfect choice for replacing an existing shower or a retro design. Weakest point is the low budget handshower but this can be easily and cheaply replaced by an Aqualisa Harmony handshower.
Date published: 2017-08-20
Rated 5 out of 5 by from Reliable Bought to replace an old Mira built in shower. Easy to install and looks fantastic in situ. Would recommend so much so I have purchased a second one.
Date published: 2016-05-12
Rated 5 out of 5 by from My preferred brand of shower Have fitted and used a couple of Aqualisa showers in the past, and have never had issues. Had to change the cartridge in one after about 6 years, but to be expected in a very hard water area. This kit is very well made as the others were, so should go the distance. The plastics aren't really an issue as they are solid, just go easy on the harsh cleaning products and they will serve you well ;-)
Date published: 2016-05-12
  • y_2018, m_8, d_18, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_28
  • loc_en_IE, sid_32030, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie