Black Friday Event

Hurry Ends 26th November

Adjustable Hole Cutter with Cowl Product Code: 48984

Cowl comes with 2 cutters for increased cutting speed in wood, plastic, plasterboard, aluminium, brass and acrylic sheets. 30mm max. depth in wood and plastic. Cowl reduces mess and risk of injury from debris.


1 piece set.
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Height : 80 mm
  • Product Length : 200 mm
  • Product Type : Adjustable Hole Cutter with Cowl
  • Total Product Weight : 2 kg
  • Product Width : 200 mm
  • Pack Size : 1
  • Product Diameter : 40-200 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
2 x TCT blades, 2 x HSS blades, TiN-coated HSS pilot drill, chisel end pilot drill and 2 x hex keys.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€51.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Adjustable Hole Cutter with Cowl is rated 3.1 out of 5 by 31.
Rated 1 out of 5 by from Useless piece of kit The graduated scale is not aligned with the cutting blades, the blades drift out of place no matter how much I've tightened them (made an absolute mess of the ceiling after a blade spiralled out of place and made the hole too large). It's a bad design having two blades, I'd been using a similar device that had one blade and a counter weight, it lasted for over 14 years, wish I'd bought a replacement one of those.
Date published: 2017-06-05
Rated 5 out of 5 by from Multi hole widths made easy I had some led downlights and extractor fans to put in the ceiling so needed 75mm, 100mm and 150mm which is a lot of holesaws to purchase and they aren't cheap. I saw this and read the reviews and whilst some of them did put me off due to the blades supposedly being weak and the ruler gauge being wrong I decided to take the plunge and buy it. I'm glad I did! This tool makes cutting holes in the ceiling such a joy. Yes seriously! No dust and plaster whatsoever on me, it all went into the huge cowl perfectly and the hole cut nicely though you must take it gently at first and don't put too much pressure on it. I've a video I took of my first attempt which I will try and post up if it's possible. Three warnings though: Instructions are basic and rubbish The spring goes on the OUTSIDE of the cowl, not the inside! Ensure you measure from outside of blade edge to centre of drill bit on one side then same on the other then measure width between the two blades to ensure the measurement is what you want rather than relying on the gauge. The blades do look fragile and I've heard replacements are impossible to buy??? My pack came with 2 'spare' ones? which looked good and sharp and pointed, but the two already installed looked deformed and bits welded onto the point, Unless these are for another use??? I'm going to take to screwfix tomorrow and see what they say. Overall if you are a diyer and don't want loads of holesaws and don't need to cut a huge number of holes then I would say absolutely buy this.
Date published: 2017-03-12
Rated 1 out of 5 by from Hole cutter I was told this was in stock but it wasn't so wasted journey to collect it. Got it the following day and the main shaft will not pass through the bearing, too big, so it cannot be assembled. Taking it back tomorrow !!!!
Date published: 2017-02-25
Rated 5 out of 5 by from Dust reducer Excellent kit, allows you to cut any size and retains most of the dust
Date published: 2017-01-28
Rated 1 out of 5 by from Beware It's cumbersome but can do the job if you're careful. But if you break a blade (and they break easily) you have to throw the whole thing away. No spares are available - I tried, could even find who makes it.
Date published: 2016-11-27
Rated 4 out of 5 by from Clean & tidy holesawing Bought this product after getting a bit fed up of being covered in dust while drilling out ceilings. It's is great for keeping the mess to a minimum. I'd read all the reviews and they pick up on all the little issues with this product. A couple of things I would add are; the cut in the ceiling is not as clean a standard holesaw, but if you take that into account and set the blades a fraction smaller than you wanted it doesn't cause a problem, also as had been mentioned else where don't use the measurements on the car of the blade they are next to useless get a tape measure and it'll go a lot smoother.
Date published: 2016-05-14
Rated 5 out of 5 by from Great for larger holes Needed to cut holes in a ceiling for 2 LED circular panels. Hole saws did not go large enough. The shield collected the dust rather than cover me or the customer's floor. Had to take it gently as cutters do not perform the same as a hole saw. Did the job well.
Date published: 2015-05-25
Rated 5 out of 5 by from Adjustable Hole Cutter It turned out to be a whole lot bigger than I expected! It'll still do the job though. It is very solid and I'm sure will be more than adequate for my needs. Haven't actually tried it yet, so can only guess at the moment.
Date published: 2015-05-21
  • y_2018, m_11, d_15, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_31
  • loc_en_IE, sid_48984, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie