Oval Bulkhead White 240V Product Code: 33673

€9.55
Aluminium. Opal diffuser.

Features

  • IP44
  • Dimmable
  • Aluminium
  • 1 Year Guarantee

Specifications

240V. W x D x H: 213 x 95 x 107mm. 1 x E27 lamp required. 1 x conduit entry point. Fixings Supplied. Weight: 0.91g.
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Height : 107 mm
  • Product Type : Oval Bulkhead
  • Power Output (Watts/Kw) : 60 W
  • IP Rating : IP44
  • Model Name : Napoli
  • Fixings Supplied : Fixings Supplied
  • Cap Fitting : ES
  • Total Product Weight : 0.91 g
  • Construction Material (Lighting) : Aluminium
  • Model No : 3022S
  • Product Width : 213 mm
  • Parent Colour : White
  • Dimmable : Dimmable
  • Colour : White
  • Product Depth : 95 mm
  • Pack Size : 1
  • Power Voltage Supply : 240 V
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€9.55 Incl. 23% VAT

Add to Wishlist

Included in this price is a contribution to recycling costs of €0.15 (€0.12 ex VAT)

More Items to Consider

Loading... Loading...
1
Oval Bulkhead White 240V is rated 4.5 out of 5 by 57.
Rated 1 out of 5 by from Poor design The cable entry is far too close to the connectors. A normal connector block would be better: the connectors are flimsy, hard to insert cable correctly and the earth terrminal is a poor wrap around type and worse it is underneath the mains connectors so hard to get to; I had to take the bulb holder off to get to it. Why does it have to have heat sheathing around the wires?? The holes for the wall screws are quite inaccessible under the bulb holder. A standard E27 bulb won't go in without bending/forcing the holder; a candle bulb fits - just. I bought two - but one is going back
Date published: 2018-05-14
Rated 4 out of 5 by from Light the light Really good, it really lights the way Value for the money
Date published: 2017-12-14
Rated 3 out of 5 by from Amazing Value Chose to buy another of these sturdy, good value bulkhead lamps. Good, clear instructions for the uninitiated, but this time around product was not quite up to standard. The retaining seal and glass holder was buckled, and someone knew, for it was screwed down hard in an attempt to straighten. I did better with a vice and good eye. Additionally, one of the rubber washers which helps keep the lens retaining screw from dropping out had been substituted for a metal washer. Otherwise would be a five star rating for a product which should last decades. A side entry conduit facility would be a very useful improvement.
Date published: 2017-10-04
Rated 4 out of 5 by from GOOD VALUE ITEM Bought this light for a garage door light, and linked it to the remote control unit. light is of reasonable quality and very good for the price, so far working fine and looks good
Date published: 2017-08-20
Rated 5 out of 5 by from Outside light Sturdy and very easy to fit gives of a good bright light with the E27 led bulb fitted
Date published: 2017-04-07
Rated 5 out of 5 by from Good value for money Easy to fit and works well with a e27 bulb. Plenty of light.
Date published: 2017-04-07
Rated 1 out of 5 by from Fiddly and cheap The internal connections are extremely flimsy. Don't buy.
Date published: 2017-02-28
Rated 3 out of 5 by from Won't suit some applications Quality of the item is fine, metal base and glass diffuser. BUT, the single cable entry point is from the rear and this is a 20mm port for a gland. Unfortunately it is so close to the side body that it is impossible to get a back nut on! So without modification it is NOT suitable for SWA armoured cable entry applications. With only one entry It is not possible to loop through for other units either. All a bit rudimentary with limited applications.
Date published: 2017-02-11
  • y_2018, m_8, d_16, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_57
  • loc_en_IE, sid_33673, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie