13A Fused Connection Unit Spur White Product Code: 3524D

€2.85
Square-edged. Supplied with fixing screws and installation instructions.

Features

  • ASTA Approved for Reliability & Safety

Specifications

13A. BS 1363-4.
Additional Information
Technical Specification
  • Brand : Unbranded
  • Product Height : 87 mm
  • Product Length : 87 mm
  • Product Thickness : 25 mm
  • Product Type : FCU
  • Total Product Weight : 0.103 kg
  • Model No : SU13A
  • Switches & Sockets Product Type : FCU
  • Switches & Sockets Finish : Plastic
  • Product Width : 25 mm
  • Parent Colour : White
  • Product Depth : 25 mm
  • Pack Size : 1
  • Switches & Sockets Profile Type : Raised Square
  • No. of Gangs : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€2.85 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
13A Fused Connection Unit Spur White is rated 4.5 out of 5 by 10.
Rated 5 out of 5 by from good item, simple to install This has one job and does it well. no fuss and simple to install
Date published: 2017-08-03
Rated 1 out of 5 by from Cheap - and it shows! The first sign of trouble was when I went to nick out the flex outlet, and instead of just the pre-formed section coming away, the entire corner broke off. Since I was putting it in a concealed space, I decided to go ahead and install it which revealed other problems. The design is poor, with the L/N terminal unusually being above each other instead of side by side, meaning the flex was awkward to connect. The lower strain relief position means that the flex enters almost right against the earth terminal, even though there is plenty of empty space where it could have been brought in with good clearance. The strain relief screws are so short it was difficult to get them started and I was using 1.25mm cable - 1.5mm must be almost impossible! There is only one earth terminal, meaning that the single core earth wire for the supply, and the flexible cable for the appliance, must be joined in this single terminal - not ideal.
Date published: 2016-10-15
Rated 5 out of 5 by from Fused plate Bargain price from Screwfix again, quick service as usual. Recommended.
Date published: 2015-12-04
Rated 5 out of 5 by from good value Purchased a couple of these to separate two pir flood lights, therefore did not require switched unit. These units although cheap, appear to be quite robust and the cable screws grip firm without stripping or breaking. Would use these again.
Date published: 2015-11-19
Rated 5 out of 5 by from Perfect on a budget First time I had used this un-branded spur, does the job same as any other so why pay more, ideal for mounting next to a corner as fuse can be removed with a top action rather than on the side, also has cord grip entries to side as well as the bottom. I will certainly use it again
Date published: 2015-10-29
Rated 5 out of 5 by from UNSWITCHED FUSED SPUR GOOD PRICE, EASY,CLEAN KNOCKOUTS FOR FLEX. SCREWCOVERS TO NEATEN THE JOB.
Date published: 2015-09-14
Rated 4 out of 5 by from Good item Good basic item with no issues fitting it, just what I wanted with easy to get at fuse.
Date published: 2015-09-13
Rated 5 out of 5 by from cost efective no ccomplaints, it dose the job at a good price, could come with a few fuses of differant ratings but cant say anything bad
Date published: 2015-05-30
  • y_2017, m_11, d_24, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_IE, sid_3524D, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie