Tesla Titanium Immersion Heater Element 27" Product Code: 75262

€35.95
Suitable for especially hard and aggressive water conditions. For use with copper and stainless steel cylinders.

Features

  • Earthing Post & Cable Clamp Pre-Assembled
  • Pre-Wired Safety Thermostat
  • Sealing Washer Included
  • Sealing Washer Included

Specifications

EN 60335-2-73.
Additional Information
Technical Specification
  • Brand : Tesla
  • Product Length : 27 "
  • Product Type : Titanium Immersion Heater Element
  • Construction Material (Plumbing) : Titanium
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€35.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Tesla Titanium Immersion Heater Element 27" is rated 4.0 out of 5 by 48.
Rated 1 out of 5 by from Rubbish The thermostat is faulty and cuts out once a day- element seems fine but a number of reviews say the same- suggest you stay clear and disappointed that this hasn't been dealt with. I guess I will source another thermostat and sort it out, but really, why should I have to? very poor indeed.
Date published: 2017-10-09
Rated 5 out of 5 by from Good Product Old copper unit packed in after 15 years service. Decided to replace it with this higher quality titanium version. Old unit hard to remove but this new one went in no problem. Just required wiring after that. Working perfectly; hopefully will get at least 15 years out of this one! Product looks good quality and comes boxed complete with instructions and seal. I have no issues recommending. Obviously can't comment on reliability yet but value seems fair.
Date published: 2017-09-15
Rated 4 out of 5 by from A quiet immersion An immersion designed for very hard water, that's easy to fit and there's no kettling - so very quiet. All our previous Incalloy immersions were noisy, so this is a pleasant surprise. Also the thermostat is surprisingly accurate, set it to 55C and the water is max 55C.
Date published: 2017-09-13
Rated 5 out of 5 by from No Hot Water Old heater packed up after 15 years service. Decided to go for what appears to be a good quality replacement. Ordered, collected and fitted in an hour. Seems OK so far!
Date published: 2017-08-11
Rated 4 out of 5 by from Makes the water Hot! Quick and easy to fit. Tapered edge on my cylinder so didn't use the supplied flat washer. All good so far, all working with no leaks. Only fitted yesterday so will comment in future on reliability.
Date published: 2017-08-10
Rated 4 out of 5 by from Great product,at a great price Great product at a great price, Clear instructions, easy to fit
Date published: 2017-04-06
Rated 1 out of 5 by from Disappointing I fitted this to replace an incoloy one that failed after 2 years. I did not fancy having to buy a new heater every few years so decided that the more expensive titanium one ought to be more reliable. How wrong I was, the element went open circuit after 5 months! Screwfix replaced it without question but I do not have a lot of confidence in how long this will last. Only time will tell.
Date published: 2017-03-02
Rated 2 out of 5 by from Could be better I agree with sore hands (see Feb 2014), this could be a much better product with just a little thought. The design has not changed for decades and really in this digital age it is pretty primitive especially when you consider what an important job it has to do. For instance: wiring the terminals is a nightmare. There are three connections as you would expect live, neutral and earth but each one requires a different tool. 1 needs a tiny spanner, one needs a Phillips screwdriver and the other needs a slotted screwdriver, whoever thought that up? My boiler is in an airing cupboard and requires major human contortions to get to the top of the element (in the dark of course). Fitting ends of wires into tiny holes upside down by torchlight is a challenge even for a professional I would have thought.
Date published: 2017-02-24
  • y_2017, m_11, d_3, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_48
  • loc_en_IE, sid_75262, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie