Sentinel X400 System Restorer 1Ltr Product Code: 89458

€21.45
1Ltr. Apply to existing systems for the removal of sludge and deposits. Iron oxide is broken down and dispersed through flushing.

Features

  • Removes Sludge
  • Breaks Down Iron Oxide
Download more information
Safety Data Sheet
Additional Information
Technical Specification
  • Brand : Sentinel
  • Sealant Adhesive Volume : 1 Ltr
  • Product Type : System Restorer
  • Volume : 1 Ltr
  • Model No : X400
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€21.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Sentinel X400 System Restorer 1Ltr is rated 4.6 out of 5 by 44.
Rated 5 out of 5 by from It worked I had some troubling noises coming from the pipes leading into my radiators. After bleeding them, this got no better. I don't remember my heating system ever being cleaned and we've had it for over 15years. I didn't really have the money for a powerflush, so I decided to give this a try. We have a sealed combi system, so I turned off the boiler and figured out how to drain the whole system. Thankfully I have a bleed valve directly outside my boiler, so I opened it and opened the upstairs radiator valves and finally the downstairs one to let the air out and allow all the water to flow out of the outside drain valve. (If you don't have a drain valve near your boiler, you might have a radiator with a drain valve at the bottom, you can attach a hose to it with a jubilee clip and drain it that way) Then, I isolated the radiator closest to the boiler and poured in the whole bottle of x400 with a fill kit after removing one of the radiator valves. Refilled and turned the heating on to let the x400 circulate, bleeding the radiators to remove trapped air. It's been less than 24 hours but already the worrying sounds from the pipes has seemed to go down and radiators which were previously lukewarm at best are now much hotter. I'm going to leave the x400 in the system for a few more days before draining and flushing with fresh water. *Remember to top up the system with a suitable inhibitor after you've flushed the x400 out.
Date published: 2017-03-09
Rated 5 out of 5 by from Restoring old central heating Using it in an old central heating system which has not been cleaned in decades. Will leave in the system for 4 weeks. May be my imagination, but after a couple of days, already there seems to be an improvement in some of the radiator cold spots.
Date published: 2016-12-14
Rated 5 out of 5 by from So good I used it again Second time using this first was several years ago. It worked well then. I have come up against a rather stubborn blockage in very old system and put the two bottles in an empty system. Topped up with water. Early days yet but previous cold spots are showing signs of warmth after only two days. Will keep my fingers crossed
Date published: 2016-12-06
Rated 5 out of 5 by from Quality product. Quality product easy to use. Did a great job of cleaning the heating system.
Date published: 2016-12-04
Rated 5 out of 5 by from Did the job I had a couple of radiators with cold spots at the bottom, these have improved since adding the product. I am leaving it for a week before flushing but seems to have done what I needed
Date published: 2016-11-22
Rated 5 out of 5 by from Excellent System Cleaner A great way to clean a heating system without the need of a powerflush. Removes the cold spots in rads and helps with the efficiency of the whole system
Date published: 2016-11-10
Rated 5 out of 5 by from central heating cleaner Used this on system with micropore and 15mm pipes. Works well no more cold spots in any radiators. Easy to add, drained some water off to de-pressurise added contents to radiator via plug. Re-pressurised system and let it do its thing.
Date published: 2016-01-31
Rated 5 out of 5 by from Excellent for old systems I have an 8mm microbore system that was installed in 1979. Despite having been power flushed in the last 2 years, the system really isn't working that well. I know several rads don't even warm up. I know that there are blockages too. We live in a very hard water area. Having added X400 in to the system and left to run for 2 days, Radiatprs that haven't worked now do. The hot water system is hotter, in fact, all the rads in the house are much hotter. The X400 was added to an empty rad and left to run through the system. As per the instructions/advice all rads were left fully open and the system was heated up. After 48 hours the difference can be felt.
Date published: 2016-01-13
  • y_2017, m_11, d_3, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_44
  • loc_en_IE, sid_89458, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie