Manrose LP100ST 20W Ceiling / Wall Mounted Extractor Fan + Timer Product Code: 12473

€23.95
ABS thermoplastic. Chrome square grille. Compliant with Part F of the Building Regulations. BEAB approved.

Features

  • Extraction Rate 85m³/hr
  • Noise Level 41dBA at 3m
  • Ceiling or Wall-Mounted
  • 1 Year Guarantee
  • Timer
  • Profile Depth: 110mm

Specifications

20W. 240V. Flush Fit. IP24. Width: 140mm. Profile depth: 110mm. Fixings Supplied. Hole dia: 112mm. Spigot dia: 100mm. Rear spigot exit. Ducting not included. Covered Fixings. . Noise level at 3m: 41dBA.
Additional Information
Technical Specification
  • Brand : Manrose
  • Product Height : 140 mm
  • Product Type : Ceiling / Wall Mounted Extractor Fan + Timer
  • Power Output (Watts/Kw) : 20 W
  • IP Rating : IP24
  • Finish : Chrome
  • Fixings Supplied : Fixings Supplied
  • Model No : LP100ST
  • Extraction Rate : 85 m³/hr
  • Product Width : 140 mm
  • Pack Size : 1
  • Switch Type : Timer
  • Power Voltage Supply : 240 V
  • Product Diameter : 100 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • Mount Type : Ceiling or Wall-Mounted
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€23.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Manrose LP100ST 20W Ceiling / Wall Mounted Extractor Fan + Timer is rated 3.7 out of 5 by 97.
Rated 4 out of 5 by from Bathroom fan Excellent value, easy to install and looks and works really well
Date published: 2017-08-20
Rated 4 out of 5 by from Quiet and easy to fit Nice moulded channel for the wires to recess into and it grasps firmly into a plasterboard or lathe and plaster ceiling, which most cheaper fans tend not to. This is quite solid and installation is a doddle.
Date published: 2017-08-10
Rated 5 out of 5 by from Great value fan Bought a few of these fans now and they have proved to be very reliable. They work well and look great. Nice slimline design and easy to fit.
Date published: 2017-08-10
Rated 1 out of 5 by from poor connections I have installed many fans but this one was the worst ever when you take off the cover to connect your 3core cable it is incredibly awkward to do,the way you have to bend the cable into place and the fact the circuit board keeps popping out when your trying to screw the cover back into place for me not worth my time.
Date published: 2017-06-18
Rated 5 out of 5 by from Fan Easy to fit neat and tidy good value I like the chrome finish
Date published: 2017-04-11
Rated 5 out of 5 by from Good value for money Easy to install, quiet and extracts well. Screw covers hide screws and sits very flat to wall
Date published: 2017-04-07
Rated 2 out of 5 by from Couldn't get to work Got this as it was one of the only chrome effect version available, yet the chrome front is just cheap plastic. First one I purchased was scratched which was swapped for a new one. On installing though (with standard 3 core cable) we couldn't get it to work. Whatever format of wiring we tried, just dead. My dad is an electrician too. Wiring to the unit is a complete pain too, through a hole then connecting to a flimsy circuit board that kept falling out with connectors at the opposite end. In the end just cleaned and put back up my 10 year old VentAxia silhouette 100. Easy to wire in with live, neutral, earth straight in the side. Word of warning too, this unit is round not square fitting so you only have about 5mm for fixings around a cut hole. Likely a hassle in a tiled bathroom.
Date published: 2017-02-24
Rated 3 out of 5 by from Good price but wiring a faff! Fairly light weight and reasonable build quality for the price tag. Fitted snug in the existing hole. Only problem was getting the cable in, cover unscrews with a single screw in the centre of the inlet of the fan, and the mains cable feeds in from the opposite side to the terminals, the fan wire looked already nipped from the factory install of the cover. if your using single core flat cable, which seems to be what the cable guide is made for, there is a bit of forcing to get his back into the fan housing. Also you cant see if you nipping the fan cable. Once everything is sitting correctly, it comes together well. they could make this easier for cable/wire entry to keep the swearing down on install
Date published: 2017-02-13
  • y_2017, m_9, d_21, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_96
  • loc_en_IE, sid_12473, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie