Makita HP1631K/2 710W Percussion Drill 240V Product Code: 46545

€118.95
The Makita HP1631K/2 percussion drill is suitable for a full range of applications. With 240V and a no load speed of up to 3200rpm, this Makita tool is powerful enough to drill through wood, steel, masonry, brick and block. It also weighs just 1.9kg and features a plush soft-grip handle, making it easy and comfortable to use. A carry case means that the tool is also easy to transport and there is also a side handle which allows for extra stability during use.

Features

  • 710W
  • Variable Speed
  • 13mm Keyless Chuck
  • Lock-On Switch
  • Soft-Grip Handle

Specifications

Max. drilling capacity in masonry 16mm, wood 30mm, steel 13mm. No. load speed: 0-3200rpm. Overall length: 239mm. Weight: 1.9kg. Includes Plug.
Additional Information
Technical Specification
  • Brand : Makita
  • Product Length : 239 mm
  • Product Type : Percussion Drill
  • Power Output (Watts/Kw) : 710 W
  • Chuck Type : Keyless Chuck
  • Corded or Cordless : Corded
  • Total Product Weight : 1.9 kg
  • Model No : HP1631K/2
  • Pack Size : 1
  • Capacity Wood : 30 mm
  • Switch Type : Lock-On Switch
  • Chuck Capacity : 13mm
  • Capacity Steel : 13 mm
  • No Load Speed : 0-3200 rpm
  • Power Voltage Supply : 240 V
  • Carry Case/Bag Included : Yes
  • Manufacturer Guarantee : 3 Year Manufacturer’s Guarantee (Registration Required, T&Cs Apply)
  • Pieces in Pack/Case : 1
  • Capacity Masonry : 16 mm
Product Contents
HP1631K/2, carry case, side handle.
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€118.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Makita HP1631K/2 710W Percussion Drill 240V is rated 3.3 out of 5 by 20.
Rated 2 out of 5 by from Not the usual Makita quality Within weeks of ownership the chuck would jam and not release, but when using percussion setting it would undo and no matter how tight it was done up it would release. Additionally, it overheated in percussion mode flinging the melted grease from the nose bearing. I've had Makita in the past (still have), but this must be the black sheep of the family.
Date published: 2017-02-22
Rated 2 out of 5 by from OK, but basic OK drill - doesn't centre well. Chuck is cheap and not durable. Cable length is terrible - you'll need an extension lead for any job - other than drilling a hole next to a socket!
Date published: 2016-12-04
Rated 5 out of 5 by from Excellent Purchase Purchased recently. But outstanding performance in difficult situations. Comfortable to use. Sensible weight and balance. Easy to use lockable chuck. Pleasure to use
Date published: 2016-12-03
Rated 1 out of 5 by from Fatally flawed chuck The Makita brand and the, featured, more positive reviews persuaded me to 'buy blind'. Looking back, I noticed, too late, that others had also spotted the poor chuck arrangement. Sadly, the chuck design is fatally flawed, in that whatever depth you might want to drill into, the chuck only grips with the drill pushed right into the chuck. If that only leaves, say, 30mm protruding, that's all you can ever go with that bit. Fantastic on paper, useless in reality, what a pity.
Date published: 2016-10-05
Rated 5 out of 5 by from Great drill A very powerful little drill that will drill masonry no problem. We used it with a 16mm spade bit to drill through double 175mm wooden gate posts.
Date published: 2016-05-18
Rated 1 out of 5 by from Rubbish chuck design I used the drill for only 2 days before taking it back with a failed chuck. I was drilling 5mm pilot holes through 25mm battens. The instructions said to insert the drill bit all the way into the chuck, but my 5mm masonry bit showed less than 25mm of drill protruding. If I inserted the bit so that I could show enough of the bit to pass through the 25mm batten the chuck would not hold it firmly enough to keep it in place and after a couple of holes it was back to showing less than 25mm. Then I got onto the main 8mm holes for the plugs. This time I could insert the drill to the base of the chuck, but was unable to tighten the chuck enough to stop the bit slipping. Worse than that, when I tried to undo the chuck it had progressively tightened in use and had to resort to a pair of plumbing spanners to undo it. I will stress that I only tightened the chuck by hand. When undone the chuck had damaged the shaft of a new drill bit and the resulting 'burr' became locked into a hexagon recess at the base of the chuck and I had to resort to a vice and pair of pliers to remove the bit from the open teeth of the chuck. Fortunately I was able to take the drill back and get a refund, so please do not make the same mistake as I made. This chuck is badly designed. Makita really need to go back to the drawing board.
Date published: 2016-02-23
Rated 1 out of 5 by from Rubbish chuck. Don't bother. It looks good, feels good and when the chuck stays tight it performs very well. Problem is the clever hand tight chuck is rubbish. It slips and it jams. Made out of plastic it slips if its not tight. It distorts when you then undo it. Too clever, doesn't work, don't buy this one.
Date published: 2016-02-02
Rated 4 out of 5 by from drill very good drill for price gos through brick and wood like a knife through butter
Date published: 2015-05-23
  • y_2017, m_11, d_3, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_en_IE, sid_46545, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie