LAP 1G Moulded Box 32mm Pack of 5 Product Code: 17573

€3.95
Includes earth terminal.

Features

  • Raised Slim Profile

Specifications

EN 60670-1, ASTA.
Additional Information
Technical Specification
  • Brand : LAP
  • Product Height : 88 mm
  • Product Length : 162 mm
  • Product Type : Back Box
  • Finish : White
  • Total Product Weight : 0.43 kg
  • Model No : H4128E*5
  • Product Width : 88 mm
  • Parent Colour : White
  • Colour : White
  • Product Depth : 32 mm
  • Pack Size : 5
  • Switches & Sockets Profile Type : Raised Slim
  • No. of Gangs : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 5
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€3.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
LAP 1G Moulded Box 32mm Pack of 5 is rated 3.6 out of 5 by 11.
Rated 3 out of 5 by from Cracking Boxes, No-literally.. I had a single one of these that I was going to use to install a light switch under the stairs. Flush mount and cable surface mounted, as it's under the stairs. On the first one I tried breaking out the side of the box with snips. Crack, the whole box broke in half. The second box after replenishing stock with this 5 pack, I tried Drilling out the breakout point. Crack, corner of the whole unit came out. Eventually I had to resort to hacksawing out the section of the box, scoring it with a stanley blade and breaking off the sawn tabs with fingers and toes crossed it didn't shatter the box again. Never had much luck with the LAP branded stuff, it's all a bit fragile. MK always plastic seems much better...
Date published: 2017-10-16
Rated 5 out of 5 by from Good cheap Back box Nice box with rounded edges, do not to over tighten the screws because it will crack.
Date published: 2017-10-01
Rated 5 out of 5 by from Good product Nice box with rounded edges, just take care not to overtighten the screws because it will crack.
Date published: 2017-06-07
Rated 4 out of 5 by from Cheap and cheerful Good product for the price, as with cheaper items it just needs a bit more care and you have to be careful not to tighten too much as it will crack, but you can't knock them for the price!
Date published: 2016-12-03
Rated 4 out of 5 by from Good, but needs improving Overall, it's good, but the knockouts don't knock out properly. It either cracks the rest of it or it chips the actual knock out.
Date published: 2016-09-09
Rated 1 out of 5 by from Cheap for a reason I'm not sure I've had a worse set of pattress boxes! I like to think I'm quite adept at nibbling out the cable entries but one false move and you've had it. I managed to use 4 of 10. Others passed away with the merest hint of overtightening, cracking like a well struck easter egg.
Date published: 2016-04-26
Rated 3 out of 5 by from Good but needs care. Good value boxes that are nicely made and look fine when fitted. Bit hard and brittle so you'll need to be better at nibbling than Peter Rabbit to avoid breakages. Use a small sharp pair of cutters and start in the thick middle part of the breakout just doing a little at a time. Don't try to twist, snap or cut at the sides of the breakout or the box will crack.
Date published: 2016-03-21
Rated 5 out of 5 by from As it says on the tin Simple but quality build and priced to sell to both trade and diy market
Date published: 2016-01-02
  • y_2017, m_11, d_2, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_IE, sid_17573, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie