Impax NWC1019 Gas MIG Welder Conversion Kit Product Code: 17787

€23.95
Easy to use gas bottle regulator kit. Ideal for MIG welders where gas is required to improve the welding process. Screws directly onto disposable gas bottles. Gas flow can be easily adjusted. Suitable for use with the Impax 150A welder (Code 17499).
Additional Information
Technical Specification
  • Brand : Impax
  • Product Type : Gas MIG Welder Conversion Kit
  • Model No : NWC1019
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Disposable bottle regulator, pipe adaptor, 2 x bottle brackets with self-tapping screws, gas tube and hose clips.
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€23.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Impax NWC1019 Gas MIG Welder Conversion Kit is rated 4.0 out of 5 by 2.
Rated 4 out of 5 by from gas regulator conversion Overall, easy to fit. The bottle holder could have been deburred to remove edges. and a small inline pressure guage would be a massive help so that some more gas can be purchased before you run out !
Date published: 2016-05-09
Rated 4 out of 5 by from Good but some care required Similar price to other regulators around. Two main reasons I purchased this one: 1) Came with a gas bottle fitting kit / brackets 2) Other regs I'd seen had a 'cheap & nasty' look. Easy to fit the brackets, single screw in each, they work really well holding the bottle in place. Regulator easy to connect, looks and feels well made and works properly. Time will tell if reliable but no causes for concern. Only problem I had was the sharp edges left on the brackets. When installed they stick out the back of the machine. To avoid filing them I added tape along the edges to avoid a gashed leg in the future. Easy fix but a bit of faff for something that is a basic requirement! ....Bit harsh but the only reason I couldn't give this 5 on feature.
Date published: 2015-11-21
  • y_2017, m_9, d_19, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_IE, sid_17787, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie