Fischer FIP 300SF Polyester Styrene-Free Resin 300ml Product Code: 23386

300ml. Low odour, 2-component resin for general fixing under dry conditions. Mixes automatically via the static mixer nozzle. Uses standard sealant gun.
Download more information
Safety Data Sheet
Additional Information
Technical Specification
  • Brand : Fischer
  • Sealant Adhesive Volume : 300 ml
  • Product Type : Polyester Styrene-Free Resin
  • Volume : 300 ml
  • Model No : FIP 300SF
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

Was €13.45

Special Price €11.95

Incl. 23% VAT

Save €1.50 (11%)

Add to Wishlist

More Items to Consider

Loading... Loading...
Fischer FIP 300SF Polyester Styrene-Free Resin 300ml is rated 4.5 out of 5 by 44.
Rated 4 out of 5 by from Good stuff Works well. The only issue is that it goes off quick so that helps in doing the job, but you need spare nozzles to get all the tube out and it doesn't keep at all. So what's left just has to be thrown away.
Date published: 2017-09-09
Rated 5 out of 5 by from Perfect fix for spinning wallplugs My standard plastic wall plugs wouldn't tighten in the wall, they just spun round and failed to grip the wall. I also tried the metal anchors but they span round and made the hole gradually bigger. Bought this, cleaned the holes, injected the resin, screwed in the threaded rod. Next morning my kitchen cupboards were on the wall. This stuff is magic.
Date published: 2017-09-03
Rated 5 out of 5 by from Good quality resin Good quality resin at a decent price. Make sure you buy some extra nozzles as it sets fast and these are not reusable after each use. Best way is to get the areas fully prepared first and do it all in one quick hit.
Date published: 2017-08-20
Rated 5 out of 5 by from Shamazing Best chem resin out there !! Used to fill mortar gaps. Was amazed how fast it dried and how strong the bond is :) way better than cement and sand by hand !!! Tube in the gun and your away :)
Date published: 2017-06-17
Rated 4 out of 5 by from Does a job Used to secure fixing in old brick wall. Did the job but only used 1/3rd of tube. No way to save the rest for another job so threw away 2/3rds of tube. Would give 5 stars if it cam with spare mixer tube and cap.
Date published: 2017-02-02
Rated 5 out of 5 by from Amazing product! Had a curtain rail to put up - the middle bracket was a nightmare because the plasterboard had been over-drilled. My sds drill made a good job of getting holes in the lintel but the rawlplugds still wouldn't bite - this product came to the rescue. Easy to squirt in and after an hour it was rock hard. I used goggles and gloves but actually not messy to use. The only issue is how to get new nozzles for the next time I need to use it.
Date published: 2017-01-28
Rated 5 out of 5 by from Really useful resin This stuff is so easy to use. 300ml size lets you use a standard skeleton gun and doesn't waste material. Other reviewers have covered use of spare nozzles and replacing the cover cap to keep it fresh. However, some advice that it "sets hard" in 15 minutes may mislead you. It does set firm but the online technical data does say it "fully cures" in x-hours and is temperature dependent - the colder it is the slower it cures. So dont fully tighten up or load the fixture without attention to this. Follow the instructions and it will repay you with its high reliability
Date published: 2017-01-21
Rated 5 out of 5 by from Well Hard ! Does what it says on the tube,great stuff. Be aware when you use it one with the nozzle that's it used up can't use the nozzle again. But you can buy replacements if you have some to use in the tube as long as the top is screwed on tight.
Date published: 2016-12-14
  • y_2017, m_11, d_6, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_44
  • loc_en_IE, sid_23386, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie