Fernox TF1 Total Filter 22mm Product Code: 84311

€117.95
Hydrocyclonic and magnetic filter for containing, trapping and removing both magnetic and non-magnetic contaminants from system water. Simple to clean and easy to install. Fits horizontal and vertical pipework.

Features

  • 1 Year Guarantee
  • Easy to Install
  • Will Not Block or Restrict Flow
  • Fits Horizontal & Vertical Pipework
  • Dosing Point for Fernox 'F'-Range Products

Specifications

L x W x H: x 100 x 300mm. The TF1 uses a 9,000 Gauss magnet and has 97% first pass efficiency.
Additional Information
Technical Specification
  • Brand : Fernox
  • Product Height : 300 mm
  • Product Type : Total Filter
  • Model No : TF1
  • Product Width : 100 mm
  • Pack Size : 1
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • Thread Size : 22 mm
Product Contents
TF1 filter, 2 x valve fittings (22mm), rubber washers, vertical to horizontal conversion kit, instruction leaflet, fittings and service label.
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

Was €133.95

Special Price €117.95

Incl. 23% VAT

Save €16.00 (11%)


Add to Wishlist

More Items to Consider

Loading... Loading...
1
Fernox TF1 Total Filter 22mm is rated 4.5 out of 5 by 26.
Rated 5 out of 5 by from Fernox TF1 Total Filter Having had problems with blockages in my own central heating system I decided to invest in this system filter. It was a breeze to fit and all installed and working within 30 minutes. After 1 week checked the filter and was quite surprised at the amount of debris and rusted metal bits caught in the filter. So far I am very impressed.
Date published: 2017-08-20
Rated 5 out of 5 by from Magnetic Attraction I hadn't heard of one of these before, but the plumber stressed the importance of one when we had a new boiler fitted. At first it seems expensive for a fancy magnet, but it's the only way to go. Very reassuring when you clean out the gunk it has collected. especially when you consider that mess would all accumulate in your beloved new VERY EXPENSIVE Boiler, and one day clog it up. A small price to pay for peace of mind. Was easy for the plumber to fit, he recomended the brand. It now just sits there and does its stuff.
Date published: 2017-08-10
Rated 5 out of 5 by from Fernox Tf1 filter i like this unit gives confidence to know what the pipes are circulating and customers can see what dirty contaminated water results in. also when the system is clean. Other positvives are easy to install good qualiy fittings included. i would always buy this model unless space was a problem as this unit is quite tall.
Date published: 2016-12-05
Rated 5 out of 5 by from Highly recommended product Added a filter to my Central heating system after I replaced the circulating pump. The old pump had significant amounts of debris inside it. Fitting the filter was very easy. It took less than 20 minutes. After re-filling the central heating system and bleeding out the air I ran the system for 10 minutes. I then closed the isolating valves of the filter and removed the top cover to inspect the filter chamber. I was amazed at the amount of debris that had been trapped in such a short time. After cleaning the filter I added Fernox F1 to the chamber, replace the top, bled out the air and re-opened the isolating valves. I checked the filter again the following day and removed a similar quantity of debris. I will probably check the filter monthly over the winter. Overall I am very impressed with its effectiveness and ease of use.
Date published: 2016-11-09
Rated 5 out of 5 by from TF1 filter Easy to install and easy isolate and clean. In my view it should be sold with either a cleaner and or inhibitor for extra value for money. Another point is the compact is cheaper but only available next day which isn't helpful if you're already in store
Date published: 2016-10-20
Rated 5 out of 5 by from Filter fitted Great and soo easy to whilst the system was drained down to fit new rads .
Date published: 2016-10-15
Rated 2 out of 5 by from Older versions Leak I have just replaced a TF1 which was leaking from the lid, manifold joint and compression fittings onto my customers utility ceiling. The filter was installed at 90 degrees to the pipe work meaning the manifold had to be slightly undone on a thread to allow for the fitting to sit at 90 degrees to the pipe which caused seals to fail over time. In addition the compression fittings require rubber washers which had also failed. The lid shouldn't need to be undone for servicing so can only assume the seals have again hardened and failed. The replacement TF1 has been upgraded to sort the thread issue between the main body and manifold although the rubber seals on the compression fittings still feel cheap. The lid on the replacement model now also includes visual alignment marks to ensure it is sufficiently tightened. The fact that the new design has been improved is a good thing but also should be a warning to anyone who has had the older version fitted which should be checked for leaks when servicing boilers. Time will tell if the new improvements work?
Date published: 2016-06-22
Rated 2 out of 5 by from TF1 Poor Reliability & Design The design is flawed - read on..... I have this fitted for about three years and yes reasonably easy to fit and yes it does remove some muck, but if your system is almost new and well flushed this is just playing safe. However, I started to note a leak in more than one place. If fitting vertically the original design was ready to fit. However, if you place say in the horizontal position or change of direction of flow you have to take out the rubber seal from the main body parts that connect to the pipe and refit with thicker seals / spacers to allow for variation in input/output ports and the main body. This is because this screws onto the main body so depending on the position there will be gap differences, hence the difference seals/spacers - this is poor design. This all well seems well and good to begin with but over time seals shrink (plastics age harden) which means which once sealed doesn't and needed tighten further so more at a 45 degrees rather than vertical, so yes it will leak over time, perhaps if I had known this I should have used some addition sealant (plumbers gold), which would have prevented the leak through the ceiling and the subsequent damage. Additionally, the inlet an outlet vales fit to the copper pipe with rubber seals not compression fittings, hence again over time, these can perish but you would have thought should have been OK after 3 years. OK perhaps fitting additional sealant may have helped, but there just no substitute for good quality compression fittings. As a result I have removed, even if I replaced the seals this would just again happened again over time and I have replaced it with a more substantial all brass device with compression fittings, similar to that fitted by the gas board. Wish I knew this at the time as it has cost me almost twice as much and damage to the ceilings. These things should be fit and forgot apart for say a yearly flush of the containments inside the main body. Don’t be swayed by well-known manufactures as they have to redesign and learn by mistakes. I note a similar issue has also been noted in another thread. I guess now I am faced with trying to bring it to the Manufacturers attention but I guess they won’t entertain so I have just wasted my money. I would advise a different make instead - dont waste your time any money.
Date published: 2016-05-23
  • y_2017, m_9, d_22, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_26
  • loc_en_IE, sid_84311, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie