Erbauer Tile & Glass Drill 6 x 76mm x 4.7mm Shank Product Code: 14855

Carbide-tipped bit for clean cutting through tile, glass and mirrors.


Diameter: 6mm.
Additional Information
Technical Specification
  • Brand : Erbauer
  • Product Length : 76 mm
  • Product Type : Tile & Glass Drill Bit
  • Total Product Weight : 0.020 kg
  • Model No : GD6
  • Product Width : 6 mm
  • Pack Size : 1
  • Shank Size : 4.7 mm
  • Product Diameter : 6 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€4.75 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Erbauer Tile & Glass Drill 6 x 76mm x 4.7mm Shank is rated 4.0 out of 5 by 24.
Rated 5 out of 5 by from Tile and Glass Drill Purchased this drill to drill 10mm wall tiles and was very pleased with the results. I used a slow speed and used water for cooling and lubricant. These tiles are extremely hard, I tried other methods to drill the tiles before having success with this product. Erbauer are an above average brand but very reasonable priced.
Date published: 2017-08-20
Rated 5 out of 5 by from Excellent product Bought this after reading others reviews. Was initially very nervous using this as I'd never drilled into tiles before. This did the job. No cracks of breaks. Used a cross of masking tape to help prevent drill bit slippinng
Date published: 2017-07-22
Rated 5 out of 5 by from mirror drill bought the drill to cut 5 holes in 6mm mirror, it cut very well with no cracking. Still sharp and still going strong.
Date published: 2017-02-16
Rated 5 out of 5 by from Tile drill Excellent product used for drilling in to normal tiles and porcelain tiles and worked really well on both.
Date published: 2016-10-04
Rated 2 out of 5 by from Not up to it Went through two of these attempting to drill holes for shower fixings and towel rails. Fine for thinner metro-style wall tiles but no good for thicker floor tiles even with lots of water. Not robust enough for more than a few holes.
Date published: 2016-10-03
Rated 5 out of 5 by from Drilled a Tile It did what I bought it for and drilled through some tiles without any problems.
Date published: 2016-09-02
Rated 3 out of 5 by from OK Quality could be better Having purchased 2 x of these for a problem with very hard porcelain bathroom tiles which simply blunted/melted professional masonry drills. I had hoped these would do the job - which they did just, but on average lasted for 2.5 holes each before they we useless. So I swapped as faulty for two more - third drill broke shattering an expensive tile and the fourth simply ended after 1.5 holes like the others. OK what do you expect for the price and are my tiles exceptionally hard well yes I've never experienced anything like it before. So you be the judge - I had to swap to another brand to finish my job.
Date published: 2016-07-25
Rated 1 out of 5 by from Worn-out so quick I used 3 of this bits and manage to make 4 holes only. I was constantly putting water to cool it down. It's no good for strong tiles. Used Slow tourch setting was useless. Not happy at all. Now I have to go back again to finish the job.
Date published: 2016-07-04
  • y_2017, m_9, d_22, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_24
  • loc_en_IE, sid_14855, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie