Erbauer Diamond Core Drill Bit 127mm x 150mm Product Code: 99629

Excellent heavy duty grade bit for fast penetration in all types of concrete and masonry.


  • Segment Height: 7.8mm
  • Wet & Dry Use


Diameter: 127mm. Length: 150mm.
Additional Information
Technical Specification
  • Brand : Erbauer
  • Product Length : 150 mm
  • Product Type : Diamond Core Drill Bit
  • Total Product Weight : 1.8 kg
  • Pack Size : 1
  • Product Diameter : 127 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

Was €51.95

Special Price €45.45

Incl. 23% VAT

Save €6.50 (12%)

Add to Wishlist

More Items to Consider

Loading... Loading...
Erbauer Diamond Core Drill Bit 127mm x 150mm is rated 4.1 out of 5 by 14.
Rated 5 out of 5 by from Works well Need it for one job only. Did the job without much effort. Good product
Date published: 2017-07-03
Rated 5 out of 5 by from Just the job! I bought this item as an add on for a kit I had previously bought from Screwfix. It functioned as expected, and the results were excellent. When used correctly there is no need to 'make good' around the hole, and is much tidier than just knocking out the bricks. Very pleased with my purchase.
Date published: 2017-06-19
Rated 4 out of 5 by from Worked Well This worked really well. Could even be used to tune an existing hole if used carefully. But make sure you buy the other 2 essential pieces needed as they don't come with it: Diamond Core Drill Guide 10mm (57014) Diamond Core SDS Plus Arbor (27287)
Date published: 2017-04-21
Rated 2 out of 5 by from Does not run true I’m putting the same revue on the Erbauer 117mm and 127mm diamond core drill bit items as they performed identically. I used them to drill through a cavity wall (concrete inner, very hard brick outer) using a brand new DeWalt diamond core drill, and an Erbauer arbour , with extension shaft for the exterior brick. The drill and arbour run perfectly true, but neither the 117mm nor 127mm core bits did! Unfortunately, due to time constraints I had to use them. They cut through both materials very well, the concrete blocks only taking a few of minutes, the brick about three times longer. The problem was the amount of vibration caused by the run out. The run out is such that it is obvious to me that Erbauer do not carry out quality control on each item; even a cursory test would show it, even at slow rotation speeds. It became tiring, and impossible to maintain precise control over the direction of the cut. Luckily, in my case that was not crucial. I’m only likely to use each bit a couple of times, so it’s no big deal to me. If I expected to have to cut similar holes regularly I’d scrap the Erbauer bits and buy a better quality brand as, besides the issues I’ve mentioned, I’m sure that it would lead to damage to the bearings in the drill. Disappointing as a correctly aligned jig when constructing the bits would solve the problem. Don't forget. I'm reviewing the ones I purchased. Others may have been luckier.
Date published: 2016-12-17
Rated 5 out of 5 by from Kitchen fitting Does a great job through Breeze block and brick. Obviously more hard going through brick but this unit handled the work load just fine.
Date published: 2016-12-05
Rated 3 out of 5 by from Erbauer 127mm diamond core bit Used recently on a 1st fix, cored through for a soil stack and boiler flue, effortless cutting power through block work and brick, used Makita 110v diamond core drill
Date published: 2016-09-23
Rated 5 out of 5 by from A really good boring time An excellent product made short work of drilling through a cavity wall to install a new toilet drain. I had bought an a diamond core extension but it was not needed as this drill went through both skins without the extension.
Date published: 2016-07-26
Rated 5 out of 5 by from Great product A superb piece of kit and a great value for money. It made an easy job of cutting a 127mm hole through a double brick wall. I've used a Dewalt drill with a 750W power rating and a cutting speed of around 600rpm. Once your are through the first internal brick identify the centre of the hole on the 2nd brick by using the centre guide drill. Then drill a guide hole through this brick to the outside. Complete the job from outside using this guide hole.
Date published: 2016-06-18
  • y_2017, m_11, d_12, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_IE, sid_99629, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie