DeWalt 13mm Extreme 2 HSS Drill Bit Product Code: 30764

Stronger and faster than standard bits. Tip starts drilling on contact, eliminating walking for clean accurate holes. Innovative tapered web design greatly reduces breakage. Gold ferrous oxide coating prevents overheating for longer bit life.


Diameter 13mm.
Additional Information
Technical Specification
  • Brand : DeWalt
  • Product Length : 151 mm
  • Product Type : Extreme 2 HSS Drill Bit
  • Total Product Weight : 120 kg
  • Model No : DT5062QZ
  • Pack Size : 1
  • Product Diameter : 13 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

Was €12.45

Special Price €10.45

Incl. 23% VAT

Save €2.00 (16%)

Add to Wishlist

More Items to Consider

Loading... Loading...
DeWalt 13mm Extreme 2 HSS Drill Bit is rated 4.2 out of 5 by 66.
Rated 5 out of 5 by from Tough as Bought to drill steel i beam in a agricultural shed. With a bit of cutting fluid it does not get hot and cuts easily. Would recommend - worth the extra money.
Date published: 2017-09-07
Rated 5 out of 5 by from largest bit to fit the chuck Went through .25 inch mild steel easy peasy, several holes and still sharp.
Date published: 2017-08-25
Rated 1 out of 5 by from Snapped!! drilling steel UC, low speed lots of cutting lube, pre drilled, should have been no bother, halfway through, picked up and sheared whole tip off. really disappointing from de walt.
Date published: 2016-05-05
Rated 1 out of 5 by from Drill blunt after one use I bought this hoping to drill at least 3 holes through some steel plate 15mm thick. It went blunt after one hole. I am going to ask screw fix for a refund
Date published: 2016-04-19
Rated 5 out of 5 by from Brilliant drill bit. As a fabricator I've been drilling holes in steel for 25 years. I've just drilled around 600 holes in 10mm steel with one of these and the last hole was drilled just as good as the first, these are the best bits I've come across.
Date published: 2016-04-11
Rated 4 out of 5 by from You get what you pay for. I had to drill a number of holes in thick (40mm) steel so I decided to buy a more expensive branded drill. I was unsure of the point profile as I hadn't encountered this before. However, it went through a dozen or so holes without struggling - just make sure you keep a little oil lubricant to keep it cool, and don't force it! Highly recommended!
Date published: 2015-04-04
Rated 4 out of 5 by from Drills holes Not the best but by no means the worst.. Does a good enough job for day to day drilling.
Date published: 2014-09-30
Rated 1 out of 5 by from a bad bit !! At just under a tenner this drill bit has cost me just over £3.00 per hole through 6.7mm steel and at this rate I could be looking at the 16 holes costing me £60.00p The first three holes went like a dream, then no bite and a blunt drill bit which I doubt will be able to be sharpened, beware this product unless you only want to drill three holes !!!
Date published: 2014-09-23
  • y_2017, m_9, d_21, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_65
  • loc_en_IE, sid_30764, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie