Bristan Bar Valve Wall Mount 11 Fixing Kit Chrome-Plated Product Code: 58495

Plastic construction with brass connectors and chrome-plated shrouds. Enables rigid fixing of any exposed bar valves with 150mm centres to 15mm pipework protruding through the cavity wall surface. Suitable for all plumbing systems.


  • Chrome-Plated
  • 5 Year Manufacturer's Guarantee (T&Cs Apply)
  • Guarantees 150mm Centres
  • Adjustable Shrouds Suit 6-15mm Tile Thickness


15mm compression inlet connections. G¾" outlet connections. Model: WMNT11 C. EN 248.
Additional Information
Technical Specification
  • Brand : Bristan
  • Product Type : Bar Valve Wall Mount 11 Fixing Kit
  • Finish : Chrome-Plated
  • Model No : WMNT11 C
  • Pack Size : 1
  • Manufacturer Guarantee : 5 Year Manufacturer's Guarantee (T&Cs Apply)
  • Pieces in Pack/Case : 1
Product Contents
Adjustable shrouds, wall plate and fixings.
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

Was €27.95

Special Price €24.45

Incl. 23% VAT

Save €3.50 (12%)

Add to Wishlist

Bristan Bar Valve Wall Mount 11 Fixing Kit Chrome-Plated is rated 4.4 out of 5 by 34.
Rated 5 out of 5 by from Hassle Free Excellent bit of kit.I always use these where I can, saves so much time.
Date published: 2017-08-05
Rated 5 out of 5 by from Great product Really great product, saves a lot of time and messing about. Highly recommended
Date published: 2017-04-11
Rated 5 out of 5 by from Bar valve fixing kit Great piece of kit. The Screwfix description did not make it clear but it is great for fixing direct to plasterboard where there is no stud behind. I've just retro fitted one over a bath with the airing cupboard behind so just had to cut out a letter box fix it in and push the pipes through. An absolute walk in the park with an iced lolly! Thank you.
Date published: 2017-03-29
Rated 4 out of 5 by from Good Product I bought this product to fit a thermostatic bar shower valve. I couldn't fault the product but I didn't use it as there was not enough length in the threaded part - to go through a plaster board wall, tiling, and then plastic wall boards. (So ensure you measure the thickness of the walls you are going to use the product on). Also, ensure you buy a matching Bristan shower to go with the product. Best wishes.
Date published: 2017-01-30
Rated 5 out of 5 by from Great product and easy to fit Easy to fit and ensures shower valve will line up without a problem. Much better than the individual mountings supplied with the Bristan bar shower valve.
Date published: 2016-12-07
Rated 4 out of 5 by from One of the better fittings. Well designed and easy to fit. the only drawback is the need for a large diamond drill to cut the holes in the tiles. Some of the other types of fitting require smaller holes.
Date published: 2016-11-15
Rated 5 out of 5 by from Great product! Easy fit for fitting an exposed shower bar. Studwork needs to be constructed, fit pipework at 180mm centres, level, fit plasterboard and this shower plate. you will need to cut out more of the plasterboard to fit the shower plate. check level again. I always use longer stainless steel screws than the ones supplied, available from Screwfix.
Date published: 2016-06-17
Rated 5 out of 5 by from Brilliant! I have just finished revamping our bathroom, and needed a way of installing a bar valve. Having looked into the best way to do this, I decided on one of these. It was one of the best decisions I made, its brilliantly simple, and gives a solid mount to attach the valve. The only worry I had was trying to cut the tiles around the 45mm diameter raised edge.....although this turned out to be fine with the purchase of a 50mm tile cutter....
Date published: 2016-04-26
  • y_2017, m_8, d_18, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_34
  • loc_en_IE, sid_58495, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie