Bosch Brick Sabre Saw Blade 305mm Product Code: 36729

Specialist brick-cutting blade that cuts brick, porous concrete, limestone and cement composite boards. Cuts bricks up to 215mm. 2tpi.


  • Fast Cut
  • Model No: S1243HM


For bricks up to 215mm
Additional Information
Technical Specification
  • Brand : Bosch
  • Product Length : 305 mm
  • Product Thickness : 1.5 mm
  • Product Type : Brick Sabre Saw Blade
  • Total Product Weight : 117 kg
  • Model No : S1243HM
  • Pack Size : 1
  • Type of Cut : Fast Cut
  • Suitable Sawing Material : Brick
  • Teeth Per Inch (TPI) : 2
  • Number of Teeth : 2
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
Delivery & Returns


Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00

Click here to see information on our delivery service



Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.


Click here to see information on returns and cancellation

€38.45 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
Bosch Brick Sabre Saw Blade 305mm is rated 3.6 out of 5 by 5.
Rated 4 out of 5 by from Careful about what you cut Have had mixed results with these blades. Have successfully cut soft brick with them but cinder block destroys the blade after a few minutes. It was more economical and quicker to perforate the cinder block with a drill. Same as cutting wood with a long blade, the cut through the wall may not remain perpendicular, so don't expect a perfect right angled cut. For that reason I tend to put in some intermediate drill holes to keep the cut straight. With soft material you still get a lot of dust, be prepared for that. Better than a grinder but still needs dust protection for yourself and the surroundings.
Date published: 2017-09-04
Rated 4 out of 5 by from Does the Job Used these before on Light Weight Block when building internal wall. Now used this for Cutting out Window Openings (x2) in both Internal (Block) and External Wall (Brick) - 2 Blades Used in total giving Clean Cuts with Minimum Clean up mess (Shadow Hoover Internal Blocks).
Date published: 2017-02-18
Rated 1 out of 5 by from Expensive rubbish I needed to cut a window hole into a single skin standard LBC brick wall, the blade blunted after two courses and two mortar courses. I will be looking for a credit or refund...
Date published: 2017-02-09
Rated 5 out of 5 by from A cut above I needed to cut 2 door holes in a plastered block wall and found this blade in your catalogue with good reviews and wanted to buy 2 as one review suggested it blunted after cutting 1 hole. Only 1 was in stock so that had to do and do it did admirably. It gave good clean straight cuts with minimal dust and mess and saved hours of work and clearing up compared to some of the alternatives;- a hammer and chisel or a disc cutter. I used it on lightweight blocks and it still has life in it, obviously other materials will behave differently but I would give this a try on other materials as well.
Date published: 2013-03-05
Rated 4 out of 5 by from Good but does not like mortar Cut well through 5 in air blocks cutting hole for door but mortar blunted blade by the end. Works well but might need one per job.
Date published: 2011-06-10
  • y_2017, m_9, d_23, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_IE, sid_36729, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie