ASD Drum Light White 240V Product Code: 55141

€19.95
Shatter-proof polycarbonate with a prismatic diffuser.

Features

  • IP44
  • Non-Dimmable
  • 1 Year Guarantee

Specifications

240V. W x D x H: 220 x 22 x 90mm. 1 x BC lamp required (Code 68597). 1 x conduit entry point. Fixings Not Supplied. Weight: 8kg.
Additional Information
Technical Specification
  • Resistant Type : UV & Weather-Resistant
  • Brand : ASD
  • Manufacturing Standards : BS EN 60598-2-1
  • Product Height : 90 mm
  • Product Type : Drum Light
  • Power Output (Watts/Kw) : 100 W
  • IP Rating : IP44
  • Fixings Supplied : Fixings Not Supplied
  • Cap Fitting : BC
  • Total Product Weight : 8 kg
  • Model No : AC/WP100
  • Lamp Type : Halogen
  • Product Width : 220 mm
  • Dimmable : Non-Dimmable
  • Colour : White
  • Product Depth : 22 mm
  • Pack Size : 1
  • Lm : 1320 lm
  • Power Voltage Supply : 240 V
  • Product Diameter : 220 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
  • Adjustable : Fixed
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€19.95 Incl. 23% VAT

Add to Wishlist

Included in this price is a contribution to recycling costs of €0.15 (€0.12 ex VAT)

More Items to Consider

Loading... Loading...
1
ASD Drum Light White 240V is rated 3.8 out of 5 by 22.
Rated 3 out of 5 by from Poorly designed On the plus side these units are quite large, so will comfortably take a smart light bulb. However the push fit terminals are horrible, difficult to get even a single cable in, and then there is a nagging feeling it would be much safer with screw terminals. Also, there is only one entry knock-out on the rear. Not ideal if you are using an existing hole and it doesn't quite line up with how you want to position the light fitting.
Date published: 2017-10-25
Rated 4 out of 5 by from Specification details The specification is incorrect. The product does not weigh 8kg as stated. It weighs 0.6kg (or 600g).
Date published: 2017-07-26
Rated 5 out of 5 by from Good light for the money Easy to install fitted half a dozen without any issues
Date published: 2016-12-04
Rated 2 out of 5 by from plastic light very plastic. customer rejected light due to cheap like appearance. I should have known this was a feature due to the price.
Date published: 2016-07-14
Rated 4 out of 5 by from just what I needed I was looking for a light to illuminate above a doorway so easy to fit and not heavy like old glass ones and took an energy saving bulb just the job
Date published: 2016-06-01
Rated 3 out of 5 by from Oh dear such a shame I brought a couple off these for a job, they are really good apart from on thing that's frustrating, time consuming but easily avoidable if the 'made in England, quality control that stuck his stamp in it had done his job. On all my units that I fitted you could not loop in and out because one of the cable entrys, there are two phase and two neutral, is blocked by the bracket holding the lamp holder, you have to remove the bracket then the lamp holder, turn it about 5 degrees then tighten it up so all 4 terminals are acessable, what a faff and waste of time that otherwise would be a good unit. Come on QA made start looking at it from and electricians point of view!!!
Date published: 2016-05-08
Rated 5 out of 5 by from Light unit Excellent product robust simple straightforward. And make in England.
Date published: 2016-03-12
Rated 4 out of 5 by from No side entry points Only has a rear entry conduit point but plenty of room for drilling your own in the sides. Has a very usefull lamp holder connection which is not only push in but has holes for two wires in each terminal and therefore ideal when linking (daisy-chaining) fittings.
Date published: 2016-02-12
  • y_2017, m_11, d_2, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_21
  • loc_en_IE, sid_55141, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie