Armeg SDS Plus Channelling Chisel 30mm Product Code: 16724

Quick, easy installation of cables, wire and copper pipe, giving a clean finish.

Specifications

30mm and 55mm channelling chisels for installing cables, wires, casing and conduit. Suitable for use on most masonry. 20mm extended version for gaining access behind skirting board. Use SDS plus machine with roto-stop.
Additional Information
Technical Specification
  • Brand : Armeg
  • Product Length : 225 mm
  • Product Type : SDS Plus Channelling Chisel
  • Suitable Use Type : Suitable for Use on Most Masonry
  • Total Product Weight : 0.37 kg
  • Model No : G225B4CC
  • Product Width : 30 mm
  • Pack Size : 1
  • Shank Type : SDS Plus
  • Product Diameter : 30 mm
  • Manufacturer Guarantee : 1 Year Guarantee
  • Pieces in Pack/Case : 1
Product Contents
N/A
Delivery & Returns

DELIVERY

Standard delivery service up to 3 working days: €8.95

Free delivery on all orders over €70.00


Click here to see information on our delivery service

 

RETURNS

Hopefully you won't need to return an item, however, if you do, it is our aim to make this as simple as possible. By following the guidance below you can help us to help you when a product is not what you expected, or is faulty. Your statutory rights are not affected by this guidance.

 

Click here to see information on returns and cancellation

€44.95 Incl. 23% VAT

Add to Wishlist

More Items to Consider

Loading... Loading...
1
Armeg SDS Plus Channelling Chisel 30mm is rated 4.2 out of 5 by 52.
Rated 4 out of 5 by from Armeg quality As with all Armeg products, you pay a bit for the name, but that is for a reason. Armeg make great products and this is no exception, product makes chasing in cables far easier than when using the cheaper alternatives and in most cases I don't need to break out the wall chaser and can just use this in my SDS cordless.
Date published: 2017-08-20
Rated 5 out of 5 by from Worth the outlay! Decided to bite the bullet and buy an SDS drill and this tool...so glad I did, saves hours over the cold chisel and hammer!! I still run a grinder down both sides, and let the chisel clean out the centre. You don't have to but it makes for a neater finish. Expensive yes, but so worth the outlay.
Date published: 2017-07-17
Rated 5 out of 5 by from Buy one! If you need to do a lot of chases then get one of these. Cuts through brick and breeze block with ease. Can't fault the item apart from being an expensive purchase when i personally will only use it the once.
Date published: 2017-06-26
Rated 4 out of 5 by from Channeling chisel This chisel is ideal for blocks and soft bricks, was a bit of a struggle going through the render leaving a bit of a messy channel
Date published: 2017-06-12
Rated 5 out of 5 by from WOW..... If you dont have one,...... get one..... Used it on a full rewire... it made very light work of breeze blocks, bricks, plaster and. The chase was narrow and very very seldom took more off than just the channel. it gave a nice clean cut.
Date published: 2017-01-29
Rated 4 out of 5 by from Great Wall chisel Great for creating chasing for running wires would highly recommend but take easy as can get hot quickly
Date published: 2017-01-16
Rated 5 out of 5 by from TIME SAVER DON'T HESITATE TO BUY THIS IT'S A GOOD TOOL AND AS WITH MOST TOOLS TREAT THEM WITH RESPECT IE DON'T KEEP USING THEM ONCE THEY GET HOT LET THEM COOL AND THEY'LL LAST
Date published: 2016-12-03
Rated 5 out of 5 by from Great bit of kit As a plumber on new build houses, i use this almost daily. I was aware of reviews saying they break but ive got about 3 years out of mine. Even now it has not broken at the shank but at the sides near the point. I must point out that the blocks i use it on are pretty soft. If used on hard blocks and bricks it might not last as well. I will have no hesitation buying another now that it has just about become unusable.
Date published: 2016-10-05
  • y_2017, m_9, d_22, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_50
  • loc_en_IE, sid_16724, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix-ie